1ASFK03611-Hyundai Kia Outer 2 Piece Tie Rod Set


Hyundai Kia Outer 2 Piece Tie Rod Set TRQ


Part Details

  • Set Quantity: 2 Piece

This part replaces:

  • Moog ES800229
  • Moog ES800230
  • OE # 568202H090
  • OE # 568202H000
  • TRQ PSA55348
Save 22%
List: $50.95 Save: $11.00
Part 1ASFK03611
In Stock

Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: PSA55348

Frequently bought together

Vehicle Fit
Warranty & Shipping
How-To & Tools

Part Details

  • Set Quantity:   2 Piece


  • Brand New Tie Rod Ends
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards

Our steering and suspension components come pre-greased,  sealed for long life and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

  1. step : Removing the Wheel (0:22)
    • Raise the vehicle with minimal weight on the tire
    • Loosen the five 21 mm lug nuts
    • Raise and support the vehicle
    • Remove the five lug nuts
    • Remove the hubcap
    • Remove the wheel
  2. step : Removing the Outer Tie Rod (0:45)
    • Remove the two 14 mm brake caliper slider bolts
    • Remove and secure the brake caliper
    • Loosen the 22 mm jam nut
    • Remove the tie rod ball joint cotter pin
    • Remove the 17 mm tie rod castle nut
    • Hammer on the knuckle to loosen the outer tie rod ball joint, or separate it with a pickle fork
    • Remove the outer tie rod end
    • To assist in re-installing the tie rod, count the turns it takes to remove it, or don't move the knuckle
  3. step : Installing the Outer Tie Rod (6:56)
    • Install the jam nut on the inner tie rod threads
    • Thread the outer tie rod onto the inner tie rod, and tighten it to the proper length
    • Insert the outer tie rod ball joint into the knuckle
    • Install the 16 mm castle nut onto the tie rod end
    • Torque the castle nut to 25 ft-lb
    • Tighten the castle nut further to align the cotter pin hole, if necessary
    • Insert the cotter pin and peen it over the nut
    • Tighten the 21 jam nut onto the outer tie rod
    • Place the brake caliper into position
    • Secure the brake caliper with the two 14 mm caliper slider bolts
    • Torque the 14 mm caliper slider bolts to 23 ft-lb
  4. step : Installing the Wheel (10:38)
    • Slide the wheel onto the wheel studs
    • Replace the hubcap
    • Replace and tighten the 21 mm lug nuts by hand
    • Lower the vehicle with minimal weight on the wheel
    • Torque the lug nuts to 80 ft-lb in a star pattern
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant
  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Large Locking Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

  • Specialty Tools

  • Pickle Fork

  • Wrenches - Metric

  • 22mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2007-2010Hyundai Elantra Hyundai Elantra Outer 2 Piece Tie Rod Set
2011-2012Hyundai Elantra Hyundai Elantra Wagon Outer 2 Piece Tie Rod Set
2010-2013Kia Forte Kia Forte Outer 2 Piece Tie Rod Set
2010-2015Kia Forte Koup Kia Forte Koup Outer 2 Piece Tie Rod Set
2016Kia Forte Koup Kia Forte Koup EX Outer 2 Piece Tie Rod Set
2016Kia Forte Koup Kia Forte Koup SX Outer 2 Piece Tie Rod Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS02858
DIY Solutions SUS07917
DIY Solutions SUS07916
MOOG ES800229
MOOG ES800230
MOOG Chassis Products ES800230
MOOG Chassis Products ES800229
Mevotech MS90612
Mevotech MS90613

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

Brand #: PSA55348
Product Reviews
There are no reviews for this item.
Customer service


Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET

Hyundai Kia Outer 2 Piece Tie Rod Set TRQ-1ASFK03611 does not fit your:

Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.