Direct Fit

Direct fit replacement; not only will the part fit correctly, but it will function correctly.  Many competitors combine applications to cut down on the amount of parts they have to carry. This can result in the following issues: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

Matched Parts

When you buy the kit pre-built by us, you can be sure that the parts are matched for optimum performance.  Not all shocks and struts are manufactured the same, so mixing and matching can result in fit issues and potentially decrease the life of the parts.

Saves Time & Money

When you buy one of our kits, you not only save money over buying the parts individually, but you also save time having to search for all of the different parts that are correct for your vehicle (because we did it for you!)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Remove the wheel (1:00)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the strut (1:25 Remove the strut)
    • Unbolt the 12 mm bolt securing the brake line.
    • Remove the 10 mm bolt securing the ABS sensor to the strut.
    • Use a breaker bar and penetrating oil to unbolt the 17 mm strut bolts on the bottom
    • Unbolt the 14 mm bolts at the top of the strut.
    • Pull the strut down and out.
  3. step : Install the new strut (3:15)
    • Replace the strut mount and tighten up the nut.
    • Decompress the spring.
    • Bolt the strut back in, torquing your 14 mm bolts to 20-30 ft lbs
    • Insert your spindle to the lower end of the strut and raise your control arm until the bolt holes line up.
    • Torque the bottom 17 mm nut to 100 ft lbs
    • Secure the 10 mm ABS sensor bracket nut with your socket and ratchet
    • Connect the brake line in place with your 12 mm socket and ratchet.
  4. step : Replace the wheel (5:47)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 22mm Socket
  • 10mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1996-1999 Hyundai Elantra Front & Rear Strut Assembly 4 Piece Set
  • 2000 Hyundai Elantra Front & Rear Strut Assembly 4 Piece Set (Built Before 7/00 Production Date)
  • 1997-2001 Hyundai Tiburon Front & Rear Strut Assembly 4 Piece Set

This part replaces:

  • Monroe 71550
  • Monroe 71549
  • Monroe 71552
  • Monroe 71551
  • KYB 333206
  • KYB 333205
  • KYB 333208
  • KYB 333207
Part #: 1ASSP00243



How-to Video:

(06:39 min)