This replacement engine mount is just what you need to keep your motor & transmission firm in place!

Specifications:

  • Rear Engine Mount
    • Located near firewall
  • Direct replacement
  • No modifications needed
  • Built to strict quality control standards

Replace your broken engine mount now with this great fitting aftermarket part. It makes a great replacement and has good cost savings over a dealer unit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Motor Mount (0:41)
    • Raise and secure the vehicle
    • Support the transmission with a jack
    • Remove the four 14mm bolts from the motor mount
    • Pull down the motor mount
  2. step : Installing the Motor Mount (2:10)
    • Lift the motor mount into place
    • Insert the four 14mm bolts into the motor mount
    • Tighten the four 14mm bolts
    • Lower the jack
    • Lower the vehicle to the ground

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 14mm Socket

  • Wrenches - Metric

  • 14mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2006 Hyundai Elantra Rear Engine Mount L4 2.0L
  • 2003-2008 Hyundai Tiburon Rear Engine Mount V6 2.7L
  • 2003-2008 Hyundai Tiburon Rear Engine Mount L4 2.0L

This part replaces:

  • Reference Number 8946
  • Beck Arnley 104-1697
  • DEA A7116
  • OE # 219302D101, 219302D151
Part #: 1AEMT00236

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(03:29 min)