Replaces

Hyundai Elantra Tiburon Engine & Transmission Mount Kit - 1AEEK00443

This replacement engine mount kit is just what you need to keep your motor & transmission firm in place!

Specifications:

  • Comes as a SET of 4
    • Front Engine Mount (near radiator)
    • RH (Passenger Side) Engine Mount
    • Rear Engine Mount (near firewall)
    • Manual Transmission Mount
  • Replaces dealer part numbers: 21910-2D050, 21810-2D100, 21810-2D100, 21810-2C300, 21930-2D101, 21930-2D151, 21830-2D000, 218302D000, 219302D101, 219302D151, 218102D100, 218102D100, 218102C300, 219102D050
  • Direct replacement
  • No modifications needed
  • Built to strict quality control standards
  • Correct for models with 2.0L & Manual Transmission ONLY

Replace your broken engine mounts now with this great fitting aftermarket set. It makes a great replacement and has good cost savings over a dealer kit.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Engine Mount (0:50)
    • Jack up the vehicle and secure it on jack stands
    • Jack underneath the oil pan with a piece of wood in between
    • Remove the upper engine mount 14mm nut and bolts from the mount bracket
    • Remove the Phillips head screw from the power steering reservoir
    • Pull the reservoir up and out
    • Remove the 10mm bolt on the bottom of the power steering reservoir
    • Remove the three 14mm bolts from the engine mount
    • Remove the 17mm nut from the top of the engine mount
    • Remove the engine mount bracket off
    • Remove the engine mount
  2. step : Installing the Engine Mount (3:15)
    • Insert the motor mount into place
    • Insert the bracket over the mount
    • Tighten the 17mm nut by hand
    • Insert and tighten the 14mm nut and bolts to the bracket
    • Insert and tighten the 14mm bolts to the engine mount
    • Torque the 14mm bolts between 50 and 55 foot-pounds
    • Torque the 17mm nut between 60 and 65 foot-pounds
    • Insert and tighten the 10mm bolt to the bottom of the power steering reservoir
    • Insert the steering reservoir back into place
    • Insert and tighten the retaining Phillips screw to the reservoir

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2006 Hyundai Elantra Engine & Transmission Mount Kit 4 Piece Set L4 2.0L Manual Transmission
  • 2003-2005 Hyundai Tiburon Engine & Transmission Mount Kit 4 Piece Set L4 2.0L Manual Transmission
Part #: 1AEEK00443

Out of Stock

How-to Video:

(05:28 min)