Replaces

Hyundai Elantra Tiburon Brake Kit Nakamoto MD700, 31320 - 1ABFS00583

This front brake rotor & pad set is just what you need to get your vehicle stopping in good order again!

Brake Pad Specifications:

  • Professional Grade SEMI-METALLIC Disc Brake Pads
  • 4 Piece FRONT Brake Pad Set
  • Includes shims
  • Direct replacements

Brake Rotor Specifications:

  • Comes as a PAIR
    • Fits LH (Driver Side) & RH (Passenger Side) FRONT
  • Fits 4 lug wheels
  • 9.25" (235 mm) Diameter Vented Rotors

This front brake rotor & pad set makes great replacements and has excellent value over the price of a dealer brakes.

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking
Positive Mold Technology

Improves durability and performance by allowing for even wear. Eliminates brake fade and glazing, generates less brake dust, and promotes a longer-lasting , better performing brake pad.

OE Grade Multi-Layer Shim

Reduces noise and vibration

Environmentally Compliant

Meets the Better Brake Law standards

100% CNC-Machined to Exact OE Specs

Balanced to reduce vibration.

Cast from OE Grade Alloy

Manufactured from OE Grade G3000 Casting Alloy.

Non-Directional Surface Finish

Helps ensure smoother, quieter, and more effective braking.

Part Details

  • Brake Pad Friction Material: Semi-Metallic
  • Brake Pad Bonding Type: Premium Posi
  • Kit Includes: (1) Front Semi-Metallic Brake Pad Set
  • Kit Includes: (2) Front Replacement Brake Rotors
  • Front Brake Rotor Specifications: Vented
  • Front Brake Rotor Specifications: 4 Lug
  • Front Brake Rotor Specifications: 10.12" (257mm)

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:53)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the hub cap
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:13)
    • Turn the rotor by hand or turn the steering wheel to turn the rotor
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
  3. step : Removing the Brake Pads (1:46)
    • Remove the two 14mm bolts from the brake caliper
    • Pry off the caliper with a flat blade screwdriver
    • Pull the caliper aside
    • Pull off the brake pads
  4. step : Removing the Brake Rotor (2:35)
    • Remove the two 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the two Phillips head screws from the brake rotor with an impact screwdriver and a hammer
    • Pull the rotor off
  5. step : Installing the New Brake Rotor (3:48)
    • Slide the rotor on
    • Insert the two Phillips screws into the rotor
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad or Channellock pliers to push the pistons back
    • Check that the caliper bracket slides move smoothly
    • Add grease to the bracket slides as necessary
    • Clean the brake pad slides with a wire brush
    • Put the caliper bracket back into place
    • Start the two 17mm bolts by hand
    • Tighten the 17mm bolts to 90 foot-pounds of torque
  6. step : Installing the New Brake Pads (5:23)
    • Install the brake pad with the metal shield on the inside
    • Install the other pad on the outside
    • Put the caliper on
    • Thread the 14mm bolts by hand
    • Tighten the 14mm bolts to between 22 - 25 foot-pounds
  7. step : Reattaching the Wheel (6:11)
    • Straighten the rotor by hand or turn the steering wheel to turn the rotor
    • Make sure the rotor moves smoothly on the backing plate
    • Slide the wheel into place
    • Put the hub cap into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  8. step : Testing the Brakes (7:06)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Wire Brush
  • Jack Stands
  • Large C-Clamp

  • Materials, Fluids, and Supplies

  • Anti-Seize Grease

  • Pliers, Cutters & misc Wrenches

  • Channel-Lock Pliers

  • Ratchets & Related

  • Ratchet
  • 1/2 Inch Breaker Bar
  • A Piece of Pipe (for leverage)
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Impact Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 22mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1998 Hyundai Elantra (Built After 8/16/98 Production Date) Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1999-2003 Hyundai Elantra Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2005 Hyundai Elantra (Built After 2/26/05 Production Date) Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 2006 Hyundai Elantra Front Premium Posi Semi-Metallic Brake Kit Nakamoto
  • 1999-2001 Hyundai Tiburon Front Premium Posi Semi-Metallic Brake Kit Nakamoto

This part replaces:

  • Nakamoto MD700, 31320
Part #: 1ABFS00583

Nakamoto
Brand #: MD700, 31320

How-to Video:

(07:33 min)