Our steering and suspension components are sealed for long life and do not require the extra maintenance typically required by greasable versions.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:50)
    • Loosen the lug nut covers with a 22mm socket
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. You may need to use a second wrench for extra leverage

  3. step : Removing the Stabilizer Link (1:12)
    • Turn the wheel by hand
    • Hold the upper stabilizer link stud with a 14mm or 9/16 inch wrench
    • Remove the upper nut from the stabilizer link with a 14mm wrench
    • Hold the lower stabilizer link stud with a 14mm or 9/16 inch wrench
    • Remove the lower nut from the stabilizer link with a 14mm wrench
    • Pull off the stabilizer link
  4. step : Reinstalling the Stabilizer Link (2:38)
    • Push the stabilizer link into place
    • Start the 14mm nuts by hand
    • Hold the upper stabilizer link stud with a 14mm or 9/16 inch wrench
    • Fasten the upper nut onto the stabilizer link with a 14mm wrench
    • Hold the lower stabilizer link stud with a 14mm or 9/16 inch wrench
    • Fasten the lower nut onto the stabilizer link with a 14mm wrench
  5. step : Reattaching the Wheel (3:34)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily with a 22mm socket
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Sockets - Metric

  • 22mm Socket

  • Wrenches - Metric

  • 14mm Wrench

  • Wrenches - SAE

  • 9/16 Inch Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000 Hyundai Elantra (Built After 7/00 Production Date) 8 Piece Set Suspension Kit
  • 2001-2006 Hyundai Elantra 8 Piece Set Suspension Kit

This part replaces:

  • Moog K90358
  • Moog K90360
  • OE # 5483034500
  • OE # 5553029500
Part #: 1ASFK05242



How-to Video:

(04:32 min)