Direct Fit

Fits and functions correctly.  Competitors combine applications to reduce the amount of parts they carry, resulting in: incorrect vehicle height, poor response and an uncomfortable ride.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Part Details

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:00)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the strut (1:25 Remove the strut)
    • Unbolt the 12 mm bolt securing the brake line.
    • Remove the 10 mm bolt securing the ABS sensor to the strut.
    • Use a breaker bar and penetrating oil to unbolt the 17 mm strut bolts on the bottom
    • Unbolt the 14 mm bolts at the top of the strut.
    • Pull the strut down and out.
  3. step : Install the new strut (3:15)
    • Replace the strut mount and tighten up the nut.
    • Decompress the spring.
    • Bolt the strut back in, torquing your 14 mm bolts to 20-30 ft lbs
    • Insert your spindle to the lower end of the strut and raise your control arm until the bolt holes line up.
    • Torque the bottom 17 mm nut to 100 ft lbs
    • Secure the 10 mm ABS sensor bracket nut with your socket and ratchet
    • Connect the brake line in place with your 12 mm socket and ratchet.
  4. step : Replace the wheel (5:47)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 22mm Socket
  • 10mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 5 answers
Does this assembly include the springs?
Eric L on Jul 16, 2018
BEST ANSWER: No, it doesn't include the springs. Unless you have bad springs I would keep the original springs. Rent or borrow a spring compressor and transfer the springs to the new struts. It is not difficult at all.

Vehicle Fit

  • 2000 Hyundai Elantra Front & Rear Strut Assembly 4 Piece Set (Built After 6/00 Production Date)
  • 2001-2006 Hyundai Elantra Front & Rear Strut Assembly 4 Piece Set

This part replaces:

  • Monroe 71550
  • Monroe 71549
  • Monroe 71407
  • Monroe 71406
  • KYB 333206
  • KYB 333205
  • KYB 333782
  • KYB 333781
Part #: 1ASSP00340

How-to Video:

(06:39 min)