Replaces

Hyundai Elantra Strut Assembly Monroe OESpectrum 71404 - MNSTS00370

Why Buy Monroe OESpectrum Shock and Struts?

Monroe OESpectrum Shock Absorbers and Struts are designed to be direct replacements while improving handling. Some of their benefits include:

  • Application specific valving
  • Improved filtering of road noise, vibration, and harshness
  • Nitrogen gas charged
  • Upgraded sealing for longer life

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the wheel (1:00)
    • Loosen the lug nuts
    • Raise and secure the vehicle
    • Remove the lug nuts and wheel.
  2. step : Remove the strut (1:25 Remove the strut)
    • Unbolt the 12 mm bolt securing the brake line.
    • Remove the 10 mm bolt securing the ABS sensor to the strut.
    • Use a breaker bar and penetrating oil to unbolt the 17 mm strut bolts on the bottom
    • Unbolt the 14 mm bolts at the top of the strut.
    • Pull the strut down and out.
  3. step : Install the new strut (3:15)
    • Replace the strut mount and tighten up the nut.
    • Decompress the spring.
    • Bolt the strut back in, torquing your 14 mm bolts to 20-30 ft lbs
    • Insert your spindle to the lower end of the strut and raise your control arm until the bolt holes line up.
    • Torque the bottom 17 mm nut to 100 ft lbs
    • Secure the 10 mm ABS sensor bracket nut with your socket and ratchet
    • Connect the brake line in place with your 12 mm socket and ratchet.
  4. step : Replace the wheel (5:47)
    • Put the wheel on and hand tighten the lug nuts.
    • Lower the vehicle and torque the lug nuts to 100 ft lbs

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands

  • Ratchets & Related

  • Torque Wrench
  • 1/2 Inch Breaker Bar
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 22mm Socket
  • 10mm Socket
  • 14mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2000 Hyundai Elantra (Built After 6/00 Production Date) Front Strut Assembly Passenger Side Monroe OESpectrum 71404
  • 2001-2006 Hyundai Elantra Front Strut Assembly Passenger Side Monroe OESpectrum 71404

This part replaces:

  • Monroe OESpectrum 71404
Only 2 left in stock
Part #: MNSTS00370

Monroe OESpectrum
Brand #: 71404

How-to Video:

(06:39 min)