2001 Hyundai Elantra Front & Rear 4 Piece Strut Assembly Set TRQ SBA58091
Guaranteed to fit 2001 Hyundai Elantra
Out of Stock
$179.95
Notify When Available
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Part Details
Quantity: 4 Piece
Kit Includes: (2) Rear Strut Assemblies (2) Front Strut Assemblies
Specification
Location
Front & Rear
Our direct fit gas-charged strut assemblies help to restore your vehicle’s handling and ride quality to just like new.
Our direct fit gas-charged shock absorbers help restore your vehicle's handling and ride quality to just like new.
Item Condition:New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Strut Assembly 1996-2006 Hyundai Elantra
Created on:
Tools used
12mm Socket
Torque Wrench
14mm Socket
Pry Bar
17mm Socket
Jack Stands
10mm Socket
Ratchet
Floor Jack
1/2 Inch Breaker Bar
22mm Socket
1. Remove the wheel
Loosen the lug nuts
Raise and secure the vehicle
Remove the lug nuts and wheel.
2. Remove the strut
Unbolt the 12 mm bolt securing the brake line.
Remove the 10 mm bolt securing the ABS sensor to the strut.
Use a breaker bar and penetrating oil to unbolt the 17 mm strut bolts on the bottom
Unbolt the 14 mm bolts at the top of the strut.
Pull the strut down and out.
3. Install the new strut
Replace the strut mount and tighten up the nut.
Decompress the spring.
Bolt the strut back in, torquing your 14 mm bolts to 20-30 ft lbs
Insert your spindle to the lower end of the strut and raise your control arm until the bolt holes line up.
Torque the bottom 17 mm nut to 100 ft lbs
Secure the 10 mm ABS sensor bracket nut with your socket and ratchet
Connect the brake line in place with your 12 mm socket and ratchet.
4. Replace the wheel
Put the wheel on and hand tighten the lug nuts.
Lower the vehicle and torque the lug nuts to 100 ft lbs
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you front strut replacement on this 2005 Hyundai Elantra. Pretty much the same as any 2000 to 2006. We show you the front right or passenger's side. Same procedure for the left, or the driver's side. We're showing you, in particular, a loaded strut, which is the strut with the spring assembly. Remove and re-install. You'll need jack and jack stands, 10, 12, 14, 17 and 22 millimeter sockets I just have 10 through 22 available. There might be a couple different size bolts on your vehicle. You'll need a ratchet, and a breaker bar or a pipe for some extra leverage, as some of the bolts tend to be a little stuck on there.
Locate your brake line clip that holds your brake line up against the strut. It's a 12 millimeter bolt. We're going to remove that. On this side the strut is a 10 millimeter bolt that holds on your ABS sensor. You're going to want to remove that as well. Your two strut bolts are 17 millimeters. I'm going to use a wrench on one end and a breaker bar on the other. You can see it takes the breaker bar and pipe just to get some extra leverage to get those broken free, but then they come out pretty easy after that so we'll fast-forward through it. If the strut is held in by three 14 millimeter nuts, located triangle up top in your strut tower, you'll need a 14 millimeter to remove them. Again, we'll fast-forward here a little bit. You can see that those bolts should come off pretty easily. I'm going to support the strut as I take off the last nut, so it doesn't fall out. Pulling the strut out to the front. Putting the strut back in. Going in from the front to the back. See if you can make sure that I don't hitch my brake line or ABS line. When I've got it somewhat close, I'm going to feed up the screws, the nuts and the strut plate, and they only go in one way, so you'll have to turn it until you get the match. I'm going to start the nuts to hold it in place. Re-insert the spindle into the lower strut.
Raise your control arm. Feel both holes line up. Fast-forward here as we tighten up those nuts and bolts preliminarily. I'm going to torque these bolts and nuts to 100 foot-pounds. Re-securing the brake line with the bolt. It's a 12 millimeter one. The ABS sensor. It's the 10 millimeter on the other side. Speed up as we tighten up the top bolts in between 25 and 30 foot-pounds. We'll keep the speed going as we put the wheel and tire back up in place. Hubcap and lug nuts. Tighten them preliminarily. With the car back on the ground, with a little bit of pressure on it, we'll wait on it. I'm going to use the 22 and a torque wrench that I've set to 100 foot-pounds and torque them. Torque them in a star pattern.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free: 888-844-3393. We're the company that's here for you on the internet, and in person.
Product Reviews
Loading reviews
3.75/ 5.04
4 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
2
0
1
0
Hyundai Struts
T
August 12, 2018
Only problem I had is they should zip tie the strut shaft clip so it doesn't extend during shipping, which 2 of the struts ship to me the shaft clip came off and the shafts were sticking out of the box, luck there was no damage, they all seem to work fine and everything fit correctly , I'm happy and would recommend them :)
Yeah this struts fit perfectly for my car thanks so much for your help
C
November 11, 2018
Yeah this struts fit perfectly for my car thanks so much for your help I love itWrite
Would have been great, but received one brand for left side and another for right
Z
October 9, 2019
The video from 1A auto describing how to install these on YouTube is absolutely excellent, I really appreciate that they put those up. I will continue to buy from 1A because of them.
Unfortunately on this order I received two struts from one brand and two struts from another brand. This would've been fine if it was one type for the front and another for the back, but they were different on each side. And the brands are super different, which I didn't notice 'till I drove the car. So now I have a car with one soft side, and one stiff side. It's an odd experience to have sporty left-hand turns and comfortable right-handers. Not quite worth the hassle of taking them off and returning though.
Hopefully 1A will read this and in future ship the same brand together, or if they have to, to pair them front-back and not side-side.
All good
D
January 16, 2020
Parts came fast
Customer Q&A
Does this assembly include the springs?July 16, 2018
Eric L
10
This set does not include the springs. These parts are exactly as shown in the pictures.
July 16, 2018
Elesban A
10
If its the same one I bought I had to reuse my old springs
July 16, 2018
B I
10
No they do not they are bare struts. No insulators, bellows or upper mounts come with these
July 17, 2018
K A
10
No, it doesn't include the springs. Unless you have bad springs I would keep the original springs. Rent or borrow a spring compressor and transfer the springs to the new struts. It is not difficult at all.
July 17, 2018
James M
10
No, the springs were not included with mine.
July 19, 2018
Benjamin W
10
No
January 16, 2020
D A
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Hyundai is a registered trademark of Hyundai Motor Company. 1A Auto is not affiliated with or sponsored by Hyundai or Hyundai Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.