Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Specifications

  • LH (Driver Side)
  • Replaces dealer part numbers: 92101-1E010, 921011E010
  • Includes lens & housing
  • Built to strict quality control standards
  • Does not include bulbs or wiring
Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

These lights do not include bulbs.  If you happen to receive a product with bulbs, the bulbs are for testing and not covered under our warranty.  Our warranty applies to the light assembly only.

  1. step : Removing the Headlight (0:16)
    • Open the hood
    • Remove the seven plastic rivnuts from the grille cover with a Phillips screwdriver
    • Remove the two 10mm bolts from the grille cover
    • Remove the 10mm bolt from the back of the headlight
    • Pull up the grille cover
    • Remove the 10mm nut from the front of the headlight
    • Disconnect the electrical connectors from the light
  2. step : Installing the Headlight (2:05)
    • Remove the plastic shipping cover from the light
    • Line up the headlight mount on the radiator support
    • Connect the headlight electrical connectors
    • Pull the grille cover around the headlight
    • Install the 10mm bolt for the front of the headlight
    • Install the 10mm bolt at the rear of the headlight
    • Install the two 10mm bolts into the grille cover
    • Install the seven rivnuts into the grille cover with a Phillips screwdriver
    • Close the hood
  3. step : Aiming the Headlights (5:35)
    • Make a dot at the center of your low beam light with a dry erase marker
    • Measure from the ground to the center of the dot
    • Line up your vehicle with a dark flat surface
    • Mark the center of each headlight on the aiming surface
    • Draw a straight line between the two marks
    • back the vehicle up 25 feet from the aiming surface
    • Turn the headlights on
    • Adjust the passenger side aiming screw until the focus of the passenger side light beam is two inches below the line on the aiming surface
    • Adjust the driver side aiming screw until the focus of the driver side light beam is four inches below the line on the aiming surface

Tools needed for replacement:

    Ratchets & Related

  • Socket Extensions
  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Sockets - Metric

  • 10mm Socket

4.00/ 5.0
1review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
1
0
0
0
It turned out great now Im going to have to order the right one!
January 27, 2017
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2006Hyundai Accent Hyundai Accent (Built After 5/23/06 Production Date) (US Built Models) Headlight Driver Side
2006Hyundai Accent Hyundai Accent Sedan (Built After 5/23/06 Production Date) (Canada Built Models (1st VIN Digit 2)) Headlight Driver Side
2007-2011Hyundai Accent Hyundai Accent Headlight Driver Side
Part #: 1ALHL01731


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(07:06 min)