HVLP Paint Spray Gun Set Vapor 19220 - 1AXAA00281

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A

Part Details

  • Spray Gun Type:   HVLP
  • Tool Kit Includes:
      (1) Locking Pressure Regulator w/ Gauge
      (1) 1.7mm Primer Gun
      (1) 1.4mm Finish Gun
      (1) 1.0mm Detail Gun
  • Air Inlet Size:   1/4 in. NPT

 

 

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Pulling Dents (1:00)
    • Wash the vehicle to best assess dents and scratches
    • You can use a ruler to help gauge dent depth and location
    • Pop out minor dents by hand from behind using light heat
    • Pull moderate dents with a dent pulling tool
    • Hammer out more severe dents or bends with a hammer and dolly
    • You may need to remove trim or panel pieces, depending on the dent locations
  2. step : Repairing Deep Scratches (8:30)
    • Tape and mask areas that will not be worked on
    • Grind and sand affected areas to expose the metal surface
    • Apply fiberglass body filler as needed
    • Sand the fiberglass body filler as needed
    • Apply finish body filler as needed
    • Sand the body filler as needed
  3. step : Painting the Vehicle (22:06)
    • Tape or mask any additional areas as needed
    • Warm up primer if necessary
    • Clean the work area with alcohol or acetone as needed
    • Apply the primer as directed by the manufacturer
    • Apply additional coats as needed
    • Sand or scuff the area as needed
    • Clean the area
    • Apply the paint in several coats, as directed by the manufacturer
    • Sand the painted area as needed
    • Clean the area
    • Apply clear coat as needed
    • Allow the clear coat to cure overnight
    • Wet sand the clear coat as needed
    • Wash the area
    • Apply buffing compound as necessary

Tools needed for replacement:

    General Tools

  • Plastic Sheet
  • Sanding Block
  • Bucket
  • Heat Gun
  • Dual Action Sander
  • Grinder
  • Cardboard

  • Materials, Fluids, and Supplies

  • Dust Mask
  • Spray Primer
  • Sandpaper
  • Spray Paint
  • Buffing Compound
  • Clear Coat
  • Painter's Tape
  • Safety Glasses
  • Sponge
  • Gloves
  • Paper Towels
  • Acetone
  • Body Filler
  • Cloth Rags

  • Specialty Tools

  • Dent Puller
  • Vacuum
  • Hammer & Dolly Set
  • Air Compressor
  • Buffing Pad

There are no reviews for this item.
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Only 1 left in stock
Part 1AXAA00281
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Vapor
Brand #: 19220