How to Replace Windshield Washer Fluid Level Sensor 2000-06 Volkswagen Jetta or Golf
Created on: 2014-03-27
If the windshield washer fluid level sensor needs to be replaced, watch this video and learn how remove the oveflow bottle to replace it
-
step 1 :Removing the Washer Level Sensor
- Disconnect the two washer pump harnesses
- Remove the 10mm bolts on either end of the washer pump
- Lift the washer bottle up and out
- Pry off the washer hose with a flat blade screwdriver
- Cover the hole
- Drain the coolant into a drip pan
- Remove the level sensor
-
step 2 :Installing the New Level Sensor
- Insert the sensor into place
- Push the coolant bottle into place
- Insert the two 10mm bolts to the washer bottle
- Connect the washer hose
- Connect the two washer pump harnesses
- Refill the coolant to the appropriate amount
Tools needed
-
Windshield Washer Fluid
Flat Blade Screwdriver
Drain Pan
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the washer level sensor on this 2004 Volkswagen Jetta. The only items you'll need for this repair is a 10mm socket, ratchet, and a flat blade screwdriver.
Start off by disconnecting your washer pump harness. Using a flat blade screwdriver, just push the tab and pull the harness up. Then push the tab on the harness back there and disconnect that as well. Now you want to remove this 10mm bolt right here and this 10mm bolt right down here. We'll just fast-foward as Don removes those.
Now push the washer bottle towards the center of the vehicle, then lift it up and out. Now just pry this washer hose off, cover the hole on the pump, and then drain out your washer fluid into a bottle. Then you just want to pry out your level sensor with a flat blade screwdriver.
Then take your new one and push it into the bottle. Now push this gasket down into this hole. Then push the washer bottle back and onto that stud. Replace those two 10mm bolts. Reconnect your washer hose and the harness for the washer pump. Then reconnect this harness back here. Replace the washer fluid in your bottle and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Washer Fluid Reservoir 2007-10 Hyundai Elantra
Watch this video to learn how to replace the windshield washer fluid reservoir on your 07-10 Hyundai Elantra. 1A Auto shows you how step by step.
