How to Replace Tail Light 2002-09 Chevy Trailblazer

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. In this video we are going to show you how to change a taillight on this 2004 Trailblazer. It's the same for most Trailblazers and Envoys, as well the Bravada. Only tool you will need is a Phillips Screwdriver.

Start by removing 2 screws. And we'll speed it up here a little bit. Once you have those screws out you pull out on your lamp and it comes out pretty easy. There are two tabs here that go here. To disconnect your harness there is a little tab right here and it pulls off.

New light from 1A Auto, you can see it is all the same, it is nice and bright and shiny. This particular one comes with the connector plate. If on your vehicle all you are looking to do is change bulbs you need to remove 3 more Phillips screws. And again we will hit fast forward as I just remove those 3 Phillips screws. We will remove those and this plate comes out to switch these bulbs you just pull the bulb out and put it back in. Then obviously you put it back together.

And we'll fast forward again as I put those 3 screws back in. Now to show you the new light from 1A Auto plugs in exactly like the original. Get back in here and you can kind of look right down and see where your pins are going into the tabs there. Push it on.

We hope this helps you out. Brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We are the company that is here for you on the Internet and in person.