How to Replace Master Power Window Switch 1998-2000 Dodge Durango

Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.

Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly: that's going to save you time and money. Thank you and enjoy the video.

In this video, we'll be showing you how to replace the master power window switch on this 1998 Dodge Durango, same as any '98 to '03. The only tool you'll need is a Phillips screwdriver.

First you're going to remove five Phillips screws. There's two underneath, one there, then one here by the back and there's one right underneath the door pull there, one right near the mirror up here, and then one in behind your door handle right there. Once you remove those screws, you want to lift up on your door panel and then pull it out. As you're pulling it out, there's a connector here for your mirror switch. Pull that. There's a tab right there you pull up and out. There's a clip here for your door handle that's black. You use your finger and push it around and pull that up and out. Then there's a connector here for your window switch that you basically grab hold of. You can either pull it down and off which is sometimes difficult. Pull that off. Your other thing you could do is if you can't pull that down and off there's just three screws that hold the switch on so you could just use a Phillips screwdriver and pull that switch off. There you go. Your door panel's off. Once you have the door panel off, there are three screws: one, two, and then three. You remove those screws and the switch comes out. Then, obviously, reinstalls the same way. You can put your door panel back on. Reinstall is just a reverse of the procedure. Make sure down here is the lock. Just push your lock through and then reconnect your window switch. Reconnect your door handle rod. Then reconnect your mirror switch. Get your door lock rod through. Put the handle up. Make sure all your clips go in place. Push it against the door and slide it down and reinstall all your screws.

We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.