How to Replace Front Door Speaker 2002-08 Dodge Ram
Created on: 2016-05-06
Need to replace the front door speaker? Our experts will show you how to remove and install the door panel and speaker yourself
-
step 1 :Removing the Door Panel
- Remove the 10mm bolt behind the door handle
- Remove the door handle
- Remove the #3 Phillips screw from the middle of the door panel
- Remove the #3 Phillips screw from the sail panel
- Remove the two #2 Phillips screws from the bottom of the door panel
- Lift the door panel up and off
- Disconnect the window switch wiring harnesses
-
step 2 :Removing the Speaker
- Remove the four #2 Phillips screws from the speaker
- Disconnect the speaker wiring harness
- Remove the speaker
-
step 3 :Installing the New Speaker
- Connect the speaker wiring harness
- Insert the speaker into place
- Tighten the four #2 Phillips screws to the speaker
-
step 4 :Reinstalling the Door Panel
- Remove the door lock bezel
- Connect the window switch wiring harness
- Insert the door panel into place
- Insert the door lock bezel into place
- Tighten the #3 Phillips screw from the middle of the door panel
- Tighten the #3 Phillips screw from the sail panel
- Tighten the two #2 Phillips screws from the bottom of the door panel
- Insert the door handle into place
- Tighten the 10mm screw to the door handle
Tools needed
-
No. 3 Phillips Screwdriver
Socket Extensions
No. 2 Phillips Screwdriver
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you front speaker replacement on this 2008 Dodge Ram. It's the same for the 2002 to 2008 Dodge Ram 1500. Items you'll need include a new speaker from 1AAuto.com, 10mm socket with ratchet and extension, #2 and #3 Phillips screwdrivers.
Remove the 10mm bolt in the inside edge of the door handle. Remove the door handle from the opening. Remove the #3 Phillips behind the door handle, and in this top corner, two #2 Phillips on the bottom of the panel. Lift up on the door panel to release. Then we'll have to disconnect the two connectors from the window switch.
Remove the speaker. Remove the four #2 Phillips screws. Disconnect the connector from the speaker.
Install the new speaker from 1AAuto.com. Reconnect the connector. Line up your holes and reinstall the four Phillips head screws.
Pop off the door lock bezel by pushing from the back. Reinstall your two window switch connectors. Line up the tabs in the door panel. Slide your door panel into place. Pop the door lock bezel back into place. Reinstall your four door panel screws. Hold your screw in place for the interior handle. Line it up and tighten it down.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Power Seat Not Moving How to Diagnose Power Seat Motors Switches and Wires
Andy shows you how to diagnose power seats that don't work, from the switches, to the motors!
