Created on: 2013-09-12
Watch this video to learn how to replace an EGR valve. The experts at 1A Auto show you how to replace the EGR valve on your 99-06 Chevy Silverado or GMC Sierra.
Socket Extensions
10mm Socket
Ratchet
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the EGR valve on this 2002 GMC Sierra 2500 HD. This particular part is actually used in a large variety of GM models. The only tool you're going to need for this is a 10 millimeter socket and ratchet with an extension.
Here's the EGR valve and you're just going to want to remove these two 10 millimeter bolts on either side of it and we'll just fast forward as he removes those bolts. Just lift the EGR valve up and off and then lift the tab on the lead and pull it free.
Here is our old EGR valve and the new one from 1AAuto. Now, you just want to put that gasket down into place and put your EGR valve into place and you just want to replace those two 10 millimeter bolts. You can see he starts them off by hand and then he's going to use the socket to tighten the rest of the way. We'll just fast forward as he does that. Now you want to reconnect your lead.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.