How To Remove Rear Door Panel 2000-07 Ford Focus
Created on: 2014-01-31
Watch this video to learn how to remove and replace the rear interior door panel on your 00-07 Ford Focus.
-
step 1 :Removing the Door Panel
- Remove the manual window crank with a pick
- Pry off the door pull trim piece with a flat blade screwdriver
- Remove the 1/4" bolts in the door pull
- Pry off the trim piece inside the door handle with a flat blade screwdriver
- Remove the T15 Torx bolt in the door handle
- Remove the six T15 Torx bolts lining the door panel
- Pry off the trim piece at the front top corner of the door panel with a flat blade screwdriver
- Lift the door panel up and off
-
step 2 :Installing the Door Panel
- Lift the door panel into place
- Push in the door panel clips
- Insert the T15 Torx bolt in the door handle
- Push in the trim piece inside the door handle
- Insert the 1/4" bolts in the door pull
- Push on the door pull trim piece
- Push on the manual window crank clip
- Push on the manual window crank
- Insert the six T15 Torx bolts lining the door panel
- Push on the trim piece at the front top corner of the door panel
Tools needed
-
Flat Blade Screwdriver
T15 Torx Driver
1/4 Inch Socket
6mm Socket
Ratchet
Pick
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to remove and replace the rear door panel on this 2005 Ford Focus. We'll show you on the passenger side, but the driver side is the same procedure. The items you'll need for this is a 6mm socket and ratchet, T15 Torx Bit, a 1/4" socket, a pick, and a flat blade screwdriver.
Using a pick, reach down behind your window crane, and pull up on the metal clip. You just want to grab it in the rounded spot, pull it right up. Once you do that, the window crank will pull right off the door.
Next, using the flat blade screwdriver, pry off your pull handle panel. Behind it, you'll see these two 1/4" bolts. We'll just fast-forward as Don removes those. Pry out the small panel behind the door handle. Behind here, there's a T15 Torx Bolt, go ahead and remove that.
Lining your door panel, there are six T15 Torx Bolts. We'll fast-forward as Don removes those. Pry off the triangular panel at the top of your door panel. Pull the door panel out, then lift it up and over the window sill. Then, over the triangle and its crape.
Now, to replace the door panel, slide it onto your interior door handle, and push it down into the window sill. Once you have that lined up, replace those two 1/4" bolts in the pull handle. Replace your pull handle panel. Now, replace the T15 behind the door handle. Put that little screw cover back in place.
Next, put the clip back into your window crank and push it on to that stud. We'll fast-forward as Don replaces those six T15 bolts lined at the door panel. Push your triangular panel back into place and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
How to Replace Front Door Panel 2011-17 Toyota Camry
How to repair, install, fix, change or replace the front door panel on 11, 12, 13, 14, 15, 16, 17 Toyota Camry
