How to Replace Vapor Canister Purge Valve 2000-04 Nissan Frontier
Created on: 2013-10-16
Watch this video to learn how to replace the evap purge canister valve in your 00-04 Nissan Frontier
-
step 1 :Removing the Vapor Canister Purge Valve
- Disconnect the vapor canister purge valve wiring harness
- Loosen the purge valve hose clamps with needle nose pliers
- Pull the hoses off the purge valve
- Remove the 12mm nut from the purge valve
- Pull off the purge valve
-
step 2 :Installing the New Purge Valve
- Put the new purge valve into place
- Fasten the washer and 12mm nut onto the purge valve
- Connect the purge valve wiring harness
- Connect the two hoses to the purge valve
- Tighten the purge valve hose clamps with needle nose pliers
Tools needed
-
12mm Socket
Flat Blade Screwdriver
Ratchet
Needle nose pliers
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the canister purge valve on this 2003 Nissan Frontier. It's pretty much the same for model years 2001 through 2004.You're going to need a new canister purge valve from 1AAuto.com, long flat blade screwdriver, needle nose pliers and a 12 mm socket with a ratchet.
You'll find your vapor canister purge valve on the driver's side, right behind the air box. The purge valve is secured by a 12mm nut and it has a connector and two hoses that go to it. Press the tab in on the connector and pull it off. Then, using a pair of needle nose pliers you can squeeze the clamps, pull them back, and then you can pull the hoses off of the vapor canister purge valve. I'm using a 12mm socket and socket wrench to remove the nut, and I'll fast forward as I do that.
Here, you can see the old part and the new part from 1A Auto. It is designed as a direct replacement fit part. Going back in it's pretty much the same as how it came out. You're going to mount the new canister purge valve. Install the washer with the 12 mm nut, tighten that up. Reinstall your two hoses. Slide the clamps back over the hoses and plug in your connector. I'll fast forward as I do that.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Shop Products
How to Replace Vapor Canister Purge Valve Evap Solenoid 2006-10 Honda Civic
This video will show how to locate and replace a bad evap vapor canister purge valve on the 06-10 Honda Civic
