Honda Pilot Acura MDX Front Strut & Spring Assembly Pair TRQ SCA57108 - 1ASSP00863

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

    We recommend that you get an alignment after finishing this repair

  1. step : Loosening the Struts (1:24)
    • Pry up the three trim caps on the cowl panel
    • Loosen the three 14mm nuts on the strut
  2. step : Removing the Wheel (2:11)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  3. step : Removing the Stabilizer Link (1:52)
    • Remove the 12mm bolts from the strut
    • Hold the upper stabilizer link stud with a 19mm wrench
    • Remove the upper nut from the stabilizer link with a 17mm socket and ratchet
    • Hold the lower stabilizer link stud with a 19mm wrench
    • Remove the lower nut from the stabilizer link with a 17mm socket and ratchet
    • Pull off the stabilizer link
  4. step : Removing the Strut (4:54)
    • Remove the lower 22mm bolt from the strut and knuckle
    • Pull up on the cowl panel
    • Remove the three 14mm nuts the rest of the way
    • Shake the strut loose from the steering knuckle
    • Remove the strut
  5. step : Compressing the Spring (7:00)
    • Insert the spring compressors into place
    • Insert the 17mm wrench to the top shaft of the spring
    • Drive the HW6 Allen Bit into the shaft
    • Using another wrench for extra leverage, loosen the top strut bolt
    • Remove the top plate
    • Remove the dust boot
  6. step : Preparing the New Strut (9:25)
    • Compress the strut to remove the strap
    • Insert the dust boot to the new strut
    • Insert the wasters to the new strut
    • Insert the spring into place
    • Insert the top, bearing, and bearing plat to the new strut
    • Insert a washer to the top of the strut
    • Tighten the top strut nut by hand
    • Tighten the top strut nut with a 7mm socket and 18mm wrench
    • Loosen the spring compressors
  7. step : Installing the New Strut (12:40)
    • Insert the strut into place
    • Tighten the three 14mm nuts by hand
    • Insert the knuckle to the strut
    • Tighten the two 22mm bolts to the knuckle and strut
    • Torque the 22mm bolts to 120 foot-pounds
    • Tighten the 12mm and 10mm bolts to the strut brackets
  8. step : Reinstalling the Stabilizer Link (14:42)
    • Push the stabilizer link into place
    • Start the 17mm nuts by hand
    • Hold the upper stabilizer link stud with a 19mm wrench
    • Fasten the upper nut onto the stabilizer link with a 17mm wrench
    • Hold the lower stabilizer link stud with a 19mm wrench
    • Fasten the lower nut onto the stabilizer link with a 17mm wrench
  9. step : Reattaching the Wheel (15:07)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  10. step : Tightening the Struts (15:46)
    • Push the cowl panel into place
    • Torque the three nuts on the top of each strut to 30 foot-pounds
    • Push on the trim caps to the cowl panel

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Hex Wrenches

  • 6mm Allen Wrench

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Ratchets & Related

  • A Piece of Pipe (for leverage)
  • Torque Wrench
  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 19mm Socket
  • 17mm Socket
  • 14mm Socket
  • 12mm Socket
  • 7mm Socket
  • 22mm Socket
  • 10mm Socket

  • Specialty Tools

  • Strut Spring Compression Tool

  • Wrenches - Metric

  • 19mm Wrench

4.57/ 5.0
14 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Excellent strut assembly
Equal or better than OEM. Arrived nicely packaged and on time. Replaced in my driveway with a few tools and a friends help. Already drove 4 thousand miles and not an issue. Best cost/benefit on the market.
June 23, 2017
What I was expecting
Looked just like the original, Installed with out a problems, ridge is what I was hoping for. Great product.
October 25, 2017
Honda Accord motor mounts
Part was delivery as expected and it was the correct part no to mentioned that price was excellent. I will be placing more orders as I need them. One Stop Auto Center
March 27, 2018
Easy Job, except for lower control arms
I actually purchased the Front struts and the suspension kit that included lower control arms, inner and outer tie rods and sway bar links. Everything went together without a problem except for the lower control arms. They were a bear. Once I figured out the the rear bushing needed to go in first it wasnt that hard, but the video makes it look much easier. I am also disappointed that the kit did not include or mention the need for new steering rack to inner tie rod bellows/boot which it does not include. I didnt change inner tie rods for this reason.
March 27, 2018
Awesome part
I ordered this part, for the ease of installing which was 100% true. The price is also awesome, they ride good and I would recommend them to others.
April 4, 2018
Great timing Good parts and very reasonable price highly recommended
April 9, 2018
No more clunking.
Strut/Spring pair works great on my Pilot. While doing the struts I decided to also do sway bars. Installation time for both sides took about 4 hrs, do to rusty bolts on the sway bars. After deciding to use a grinder on the lower link bolts the passenger side only took about an 1 and a 1/2. Highly recommended and with a cabin filter, new headlight assemblies and an alignment it only costed around $450.
May 22, 2018
Fixed suspension noise
Appear to be well built. Perfect fit for 2006 Honda Pilot. Well see if the gas seal holds up.
July 9, 2018
so far so good, assuming they hold up, they are working well now
July 27, 2018
Super fast shipping and great packaging
The struts were what I would expect from $200/pr. Probably less than factory ride quality but better than the 200k on the old ones. Fit and finish was great. 1aauto is a great source for parts.
August 9, 2018
Parts are working fine and the delivery was on time
August 15, 2018
Awsome prices
Thank you good service, fast shipping,good prices and variety
August 26, 2018
Works well on my Acura MDX
Received the parts on time and they were compatible with my Acura MDX, as promised!
November 28, 2018
Great value
Great price for quality struts fit perfectly in and out quick.
December 2, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
What brand of strut comes with the spring kit?
John L January 17, 2016
I came with FCS brand struts, never heard of them but seemed to be good quality.
Keith L January 18, 2016
These will be our 1A Auto brand strut. These will come with a lifetime warranty and will also be shipped free to the lower 48 states. Have a great day!
Derek C January 19, 2016
where are these replacement parts manufactured, China, USA, Japan, or ?
Doug R November 20, 2017
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured in different countries to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please dont hesitate to ask.
Adam G November 21, 2017
Year Make Model Description
2001-2002Acura MDX Acura MDX Front Strut & Spring Assembly Pair
2003-2008Honda Pilot Honda Pilot Front Strut & Spring Assembly Pair
Part 1ASSP00863
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Brand #: SCA57108