Replaces

Honda O2 Oxygen Sensor Walker Products 250-24620 - WKEOS00082

Walker Products Oxygen Sensor: 250-24620

Walker Products, an ISO 9001-2008 / TS16949 certified company, specializes in the manufacturing and distribution of Fuel System Components and Automotive Engine Management products. Walker is committed to meeting or exceeding OEM or equivalent standards and specifications. This effort is backed by Walker's own manufacturing, product management and engineering expertise.

Specifications:

  • Brand New Walker Oxygen Sensor
  • Direct Fit
    • Correct Connector No cutting or splicing
    • Correct wire length (13.5 Inches)
  • Upstream or Downstream Sensor
    • as listed per application
    • used on some models that do not use a downstream sensor
  • 4 wire configuration
  • Replaces dealer part numbers: 36531P0BA01, 36531 P0B A01, 36531P12A03, 36531 P12 A03, 36531P5K003, 36531 P5K 003, 36531PAA305, 36531 PAA 305, 36531PAAA01, 36531 PAA A01, 36531PAAA02, 36531 PAA A02, 36531PCC014, 36531 PCC 014, 36532P8FA01, 36532 P8F A01, 36532PHMA11, 36532 PHM A11
  • Built and tested to strict quality control standards

Note: For clarification purposes:

  • Upstream location is between the catalytic converter and the engine
  • Downstream location is between the catalytic converter and the tailpipe

If you have a bad O2 sensor causing your vehicle to run poorly or fail an emission test then this is the part for you.

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Note:  You may be required to reset the vehicle’s computer after installation of this part.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Identifying your Oxygen Sensors (0:57)
    • Upstream oxygen sensors are located in between the engine and the catalytic converter
    • Downstream oxygen sensors are located in the catalytic converter or farther away from the engine than the catalytic converter
    • Locate your vehicle's firing order diagram
    • The bank that contains cylinder one is bank one
    • The bank that does not contain cylinder one is bank two, even if it does not contain cylinder two

Tools needed for replacement:

    1A - No Tools Needed

  • No Tools Needed

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1994-1995 Honda Accord DX LX L4 2.2L O2 Oxygen Sensor Walker Products 250-24620
  • 1996-1997 Honda Accord DX LX L4 2.2L Upstream O2 Oxygen Sensor Walker Products 250-24620
  • 1998-2002 Honda Accord L4 2.3L (excluding Ultra Low Emissions Vehicle (ULEV)) Upstream O2 Oxygen Sensor Walker Products 250-24620
  • 2000 Honda Insight L3 1.0L Downstream O2 Oxygen Sensor Walker Products 250-24620
  • 2001 Honda Insight Manual Transmission Downstream O2 Oxygen Sensor Walker Products 250-24620
  • 1999-2001 Honda Odyssey V6 3.5L Downstream O2 Oxygen Sensor Walker Products 250-24620
  • 1994-1995 Honda Prelude L4 2.2L (excluding VTEC) O2 Oxygen Sensor Walker Products 250-24620

This part replaces:

  • Walker Products 250-24620
Only 2 left in stock
Part #: WKEOS00082

Walker Products
Brand #: 250-24620

How-to Video:

(03:08 min)