Replaces

Honda Element Control Arm Front Pair - 1ASFK01796

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Front or Rear Location:   Front
  • Location:   Lower

These replacement front lower control arms are just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) FRONT LOWER
  • Includes bushings
  • Replaces dealer part number: 51350-SCV-A03, 51350SCVA03, 51350-SCV-A01, 51350SCVA01, 51350-SCV-A02, 51350SCVA02, 51360-SCV-A03, 51360SCVA03, 51360-SCV-A01, 51360SCVA01, 51360-SCV-A02, 51360SCVA02
  • Direct replacement
  • Built to strict quality control standards

Remember whenever you are replacing any front end or steering components you should have your vehicle professionally aligned as soon as possible. This will ensure proper tracking and even tire wear.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:34)
    • Loosen the lug nut covers with a 19mm socket
    • Pry off the center cap with a flat blade screwdriver
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Sway Bar Link (1:09)
    • Remove the lower sway bar link nut with a 5mm allen wrench and a 14mm wrench
    • Remove the sway bar link with a pry bar
  3. step : Removing the Front Lower Control Arms (2:02)
    • Straighten the cotter pin out with needle nose pliers
    • Remove the cotter pin
    • Remove the castle nut with a 17mm socket and breaker bar
    • Break the ball joint free with a pickle fork and hammer
    • Separate the control arm from the ball joint spindle by hand
    • Remove the two control arm bolts with a 19mm socket
    • Remove the control arm by hand
  4. step : Installing the Front Lower Control Arms (4:32)
    • Insert the front lower control arm into place, using a pry bar if needed
    • Place the bolts into the control arm by hand
    • Torque the bolts to 61 foot-pounds
    • Place the ball joint into the control arm
    • Spin the castle nut on by hand
    • Tighten the castle nut with an 18mm socket and ratchet
    • Torque the castle nut to 51 foot-pounds
    • Insert the cotter pin
    • Bend the end of the cotter pin down with a pair of pliers and clip the end of the pin with cutting pliers
  5. step : Installing the Sway Bar Link (7:18)
    • Insert the bottom half of the sway bar link into the control arm
    • Tighten the lower nut with a 15mm socket and ratchet and a 14mm wrench
    • Torque the lower nut to 29 foot-pounds
  6. step : Removing the Wheel (8:09)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Side Cutters

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 15mm Socket
  • 16mm Socket
  • 17mm Socket
  • 18mm Socket
  • 19mm Socket

  • Specialty Tools

  • Pickle Fork

  • Wrenches - Metric

  • 14mm Wrench

4.33/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
1
0
0
the upper control arms good so far but the sway bar bushing right side broke already.
November 1, 2017
Wheel bearing
It was good easy to install I always buy from this store shop fast 2 to 3 days parts there
May 11, 2018
Great value
Way easier than replacing just the bushings! 1A has always sent me good quality parts.
September 8, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2003-2006Honda Element Honda Element Front Lower Control Arm Pair
2007-2011Honda Element Honda Element LX EX Front Lower Control Arm Pair
Part #: 1ASFK01796


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(09:32 min)