These door lock cylinders are just what you need to get your vehicles locks working again


  • Comes as a Pair
  • Includes:
    • Both LH (Driver Side) & RH (Passenger Side) Door locks FRONT
    • 2 Keys
  • Correct rod connection
  • Direct replacement
  • Built to strict quality control standards

These door lock cylinders are built to strict quality control standards. They make great replacements and have good cost savings over dealer units.

Part Details

  • Front or Rear Location: Front

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:42)
    • Loosen the negative battery terminal with a 10mm wrench
    • Pry up the trap door in the door pull with a flat blade screwdriver
    • Remove the Phillips screw in the door pull
    • Pry off the trap door in the door handle with a flat blade screwdriver
    • Remove the two Phillips screws in the door handle
    • Pry up the power window switch
    • Disconnect the switch wiring harnesses
    • Pull the door handle out and remove the door handle rod
    • Disconnect the door handle wiring harness
    • Remove the two Phillips screws previously behind the door pull
    • Remove the sail panel
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Remove the pins from the water shield with needle nose pliers
    • Carefully remove the water shield
  2. step : Removing the Door Handle (3:23)
    • Remove the two 10mm bolts from the window
    • Lift the window up and out
    • Remove the 10mm bolt from the bottom of the window track
    • Move the window track out of the way
    • Unlatch the latch rod clip
    • Remove the two 10mm nuts from the door handle
    • Push down on the retaining clip with a flat blade screwdriver
    • Pull the retaining clip down with a bent tip pick tool to loosen the lock cylinder
    • Pry out the door lock cylinder with a flat blade screwdriver
    • Remove the plate
    • Remove the door handle
  3. step : Removing the Door Lock Cylinder (6:09)
    • Disconnect the white clip from the door lock cylinder with a flat blade screwdriver
  4. step : Installing the Door Lock Cylinder (6:53)
    • Attach the door lock cylinder to the rod
  5. step : Installing the Door Handle (7:05)
    • Insert the door handle into place
    • Insert the plate into place
    • Hand tighten the 10mm nuts
    • Insert the door lock cylinder into the door handle
    • Reclip the latch rod
    • Tighten the two 10mm nuts
    • Insert the window track into place
    • Tighten the 10mm bolt to the window track
    • Insert the window
    • Tighten the two 10mm bolts to the window
  6. step : Installing the Door Panel (10:07)
    • Replace the water shield and its clips
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the sail panel into place
    • Insert the two Phillips screws into the door
    • Connect the wiring harness to the power window switch
    • Press the window switch into place
    • Connect the door lock switch to the door handle
    • Connect the door rod into the handle
    • Press the handle into place
    • Tighten the two Phillips screws to the door handle
    • Insert the trim panel into the door handle
    • Tighten the Phillips screw in the door pull
    • Press the trap door into the door pull

Tools needed for replacement:

    General Tools

  • Pick

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

4.9 / 5.0
13 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Honda door lock cylinder
Worked excellent. Better than the ones I bought from one of their competitors.
August 6, 2018
1 month ago
Honda Odyssey Door Lock Cylinder Replacement
Replaced the driver and passenger side door locks. The replacement cylinders/keys arrived in just two days. The job took about an hour per door. The cylinders fit and operate perfectly. Like new! Wish I had not waited a year to do it.
May 23, 2018
3 months ago
Every thing promised
Lock cylinders and handle were everything they promised! High quality and fit exactly and intended!
May 21, 2018
3 months ago
Honda Odyssey door lock cylinders
Both door lock cylinders my 2003 Honda Odyssey seized up on me. The dealership wanted over $100 for each cylinder, and another $100 to re key the new cylinders to use the same key. I found this pair of cylinders on 1A Auto, that were already keyed to the same key and only$60 for the pair. They fit perfectly into the vehicle, and the online video for installation was bang on.
April 21, 2018
4 months ago
Door locks
Shipped quickly and installed easy. Videos from 1A really helped.
January 11, 2018
7 months ago
Locks Exactly what I needed!
The locks were the exact fit for the model Honda I had. Everything works great and the accompanying video was very helpful. The key is a little thin but still works fine.
October 24, 2017
10 months ago
Parts and You Tube
Very nice to get shipment quickly and then you need to get the parts installed. Has a guide book but was lacking in info. Went to You Tube and 1A auto came up with an excelent video. Easy fux after watching. THANKS
August 21, 2017
1 year ago
door locks
It worked just fine will order more parts if needed yes recomend highly
July 6, 2017
1 year ago
Keys easy to recognize
The keys are dissimilar from my ignition key, which makes it very easy to select the right key to open my door. Very easy to install, and work great!
July 2, 2017
1 year ago
Great replacement locks!
These are not the same keys as the OEM ones, they are a bit different. They were easy to install, as long as you have working knowledge of vehicles, and have not failed to operate. These are by far cheaper than the OEM version but work just as well. My original ones froze up, rusted and corrosion, so I replaced them with these. Very satisfied!
June 19, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 10 answers
Does this product comes with 2 cylinder ??
Guillermo C on Mar 3, 2017
BEST ANSWER: Yes, it comes with 2 cylinders and 2 keys. Both work great, and the keys are easily copied blanks, so easy to get spares. The replacement cylinders work better than the originals.
Can the keys be used in the ignition? (Can they be programmed to start the van?)
Francisco G on Oct 28, 2016
BEST ANSWER: The key that comes with the new locks won't work in the original ignition lock. I just carry both keys, the original key for starting the car and the new key for unlocking the car.

Vehicle Fit

Year Make Model Description
1998-2002Honda Accord Honda Accord Front Door Lock Cylinder
2001-2005Honda Civic Honda Civic Front Door Lock Cylinder
1999-2004Honda Odyssey Honda Odyssey Front Door Lock Cylinder
2000-2009Honda S2000 Honda S2000 Front Door Lock Cylinder

This part replaces:

  • OE # 72146S73003
  • OE # 72145S73003
Part #: 1ADLC00004

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(13:36 min)