Replaces
Frequently bought together
Item Condition:
New
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be showing you how to replace the door jamb light switch on this '95 Accord same as any '94, '97 Accord and many Honda models. We're going to start by disconnecting your negative battery terminal. The door jamb switch is on the front. Kind of pull down the boot and there's a screw right underneath. Pretty much the same for the rear as well although the screw is on the bottom side. The switch is the same though. Pull that down. Unscrew. You might want to use your screwdriver to kind of break the seal. Pull it out. Unhook it. The switch from 1A Auto here's the new one. The exact same as the original. It will bolt right in. On this car, this switch is in okay shape so I'm going to reinstall the original one. These switches ... the indicator is if your dome light works when you open the passenger's door but it doesn't work when you open the driver's door, that's usually an indicator that the switch is messed up. Reconnect it. Push it down in. Push it nice and flush. Push the boot.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free (888) 844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet. Hi I'm Don from 1A Auto. I hope this how to video helps you out and the next time you need a part for your vehicle think of 1AAuto.com. Thanks.
In this video we show you how to replace a door jamb switch on this 1998 Honda Civic and the only items you'll need is a new door jamb switch from 1AAuto.com and a Philips screwdriver. Your door jamb switch is located right here, just pull back the rubber tab and remove this Phillips screw and it pulls out. Just disconnect this wire.
On the right is your old one; on the left is the new one from 1A Auto. You can see they're identical in every way and it'll mount exactly the same. Reconnect your wire, push the new door jamb switch into place and tighten up that Phillips screw. Replace the rubber tab and you're all set.
We hope this helps you out, brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
