Part Details

  • Quantity: 4 Piece Set
  • Kit Includes:
    (2) Front Sway Bar Links
    (2) Front Strut & Spring Assemblies

 

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:48)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Strut and Spring Assembly (1:28)
    • Place a 17mm wrench on the upper sway bar link nut
    • Grab the sway bar link joint with a 6mm allen wrench and socket
    • Loosen the 17mm nut with a socket and ratchet
    • Remove the sway bar link from the strut
    • Pry the ABS sensor wire out of its retainer in the strut
    • Remove the 12mm bolt on the brake line brace
    • Remove the two 22mm lower strut bolts with a 19mm wrench and 22mm socket and breaker bar
    • Tap the bolts out with a hammer and punch if needed
    • Peel back some weatherstripping from the cowl panel
    • Undo the cover on the cowl panel
    • Loosen the 14mm nuts on top of the strut
    • Remove the nuts with a magnet
    • Remove the strut
  3. step : Installing the Front Strut and Spring Assembly (8:52)
    • Reinstall the strut into the vehicle
    • Hand-tighten the top nut
    • Torque the upper nuts to 33 foot-pounds
    • Replace the cowl cover
    • Replace the weatherstrip
    • Insert the steering knuckle into the strut
    • Tighten the lower bolts with a 19mm socket and ratchet
    • Torque the bolts to 116 foot-pounds
    • Reinstall the brake hose into the retainer
    • Tighten the 12mm bolt to the retainer
    • Pop the ABS sensor into the bracket
    • Reinstall the sway bar link into the strut
    • Grab the sway bar link joint with locking pliers and a 6mm allen wrench and socket
    • Tighten the 17mm nut with a socket and ratchet
  4. step : Reattaching the Wheel (14:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern to 80 foot-pounds

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Magnet - Extendable
  • Center Punch
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket
  • 22mm Socket

  • Specialty Tools

  • Trim Tool Set

  • Wrenches - Metric

  • 17mm Wrench
  • 18mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2007-2011Honda CR-V Honda CR-V 4 Piece Set Suspension Kit
2012-2014Honda CR-V Honda CR-V (excluding Touring Models) 4 Piece Set Suspension Kit

This part replaces:

  • Moog K750297
  • Hollander 527-50268L, 60693L
  • Hollander 527-50267R, 60692R
  • OE # 51320T0AA01
  • OE # 51320STKA01
Part #: 1ASFK05474


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(15:13 min)