Replaces

Honda CR-V Strut & Spring Assembly Pair TRQ SCA57201 - 1ASSP01105

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   Pair

In the past, replacing struts required specialized tools to compress, remove and transfer the old spring and mount.  Pre-assembled with all new parts, our complete strut and spring assemblies make this job much quicker and easier for the do-it-yourself mechanic.

Each complete strut & spring assembly contains:

  • Upper Strut Mount
  • Strut Bearing
  • Coil Spring
  • Boot & Bumper Kit
  • Gas-charged Strut 
Pre-Assembled

Loaded strut & spring assemblies allow for a quicker, safer install than bare struts.  No spring compressor required! 

Trouble-Free Install

Includes the matched parts needed. New components over reused parts provide a better ride and save you from having to repair again.

Matched Parts

Not all shocks and struts are manufactured the same.  Mixing and matching can result in ride quality issues and decrease the life of the parts.

Saves Time & Money

Over buying the parts individually, or having to search different parts that are correct for your vehicle (because we did it for you!)

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Wheel (0:48)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Front Strut and Spring Assembly (1:28)
    • Place a 17mm wrench on the upper sway bar link nut
    • Grab the sway bar link joint with a 6mm allen wrench and socket
    • Loosen the 17mm nut with a socket and ratchet
    • Remove the sway bar link from the strut
    • Pry the ABS sensor wire out of its retainer in the strut
    • Remove the 12mm bolt on the brake line brace
    • Remove the two 22mm lower strut bolts with a 19mm wrench and 22mm socket and breaker bar
    • Tap the bolts out with a hammer and punch if needed
    • Peel back some weatherstripping from the cowl panel
    • Undo the cover on the cowl panel
    • Loosen the 14mm nuts on top of the strut
    • Remove the nuts with a magnet
    • Remove the strut
  3. step : Installing the Front Strut and Spring Assembly (8:52)
    • Reinstall the strut into the vehicle
    • Hand-tighten the top nut
    • Torque the upper nuts to 33 foot-pounds
    • Replace the cowl cover
    • Replace the weatherstrip
    • Insert the steering knuckle into the strut
    • Tighten the lower bolts with a 19mm socket and ratchet
    • Torque the bolts to 116 foot-pounds
    • Reinstall the brake hose into the retainer
    • Tighten the 12mm bolt to the retainer
    • Pop the ABS sensor into the bracket
    • Reinstall the sway bar link into the strut
    • Grab the sway bar link joint with locking pliers and a 6mm allen wrench and socket
    • Tighten the 17mm nut with a socket and ratchet
  4. step : Reattaching the Wheel (14:16)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Torque the lug nuts in a crossing or star pattern to 80 foot-pounds

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Magnet - Extendable
  • Center Punch
  • Wire Brush
  • Floor Jack

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Vise Grip Pliers

  • Ratchets & Related

  • Socket Extensions
  • Torque Wrench
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 12mm Socket
  • 17mm Socket
  • 19mm Socket
  • 22mm Socket

  • Specialty Tools

  • Trim Tool Set

  • Wrenches - Metric

  • 17mm Wrench
  • 18mm Wrench

5.00/ 5.0
6 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
0
0
0
0
Fast ship
Over all great product my hubby said easiest unstall ever and the shipping was fast too. Price was pretty great.
February 20, 2017
2011 Honda CR-V Front Strut Assemblies
These two strut assemblies arrived in good condition, except for two missing nuts of the 10 that were sent with the struts (for the top mount). These worked loose from their studs in the several trips they made since produced. These heavy units, although packed in boxes, and wrapped in plastic, tore holes in their boxes, and the nuts worked loose and were lost. These were not serious losses and they in no way affected the use of the struts, but it is worth mentioning. The strut assemblies were well made and fit the vehicle correctly. The installation was very easily accomplished, and the results were very pleasing to the owner. One, for the price, and Two, for the improvement in the ride of the vehicle.
July 12, 2018
Right on
Product was exactly what I needed and description was perfect and parts arrived quickly and in great condition.
August 10, 2018
Strut assembly
It worked perfect on my friends crv. She’s all too happy knowing she have a better ride. It’s quite now. No more clanking noise. Thanks.
September 12, 2018
Front Shocks for Honda CR-V 07
On time delivery & Exact Fit, Easy to Install with the help of 1A Auto helping video... Great on money as compare to others... Good Job 1A Auto Team I will never Buy Car Stuff from other venders if I get from 1A Auto??. Thanks
October 11, 2018
Great product!!
This was a great product, made well and easy to install, thanks so much to the helpful video!
November 8, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Who makes this product?
Daniel Z June 28, 2017
This is our 1A Auto brand part, and built to meet or exceed OE specifications. This is also backed by a limited lifetime warranty.
Alex P June 28, 2017
Year Make Model Description
2007-2011Honda CR-V Honda CR-V Front Strut & Spring Assembly Pair TRQ SCA57201
2012-2014Honda CR-V Honda CR-V Front Strut & Spring Assembly Pair (excluding Touring Models) TRQ SCA57201
Part #: 1ASSP01105


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

TRQ
Brand #: SCA57201

How-to Video:

(15:13 min)