Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Part Details

  • Quantity:   8 Piece Set
  • Kit Includes:
      (2) Front Sway Bar Links
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods
      (2) Front Lower Control Arms

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:58)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:35)
    • Turn the wheel by hand
    • Clean off the threads with rust penetrant and a wire brush if necessary
    • Hold the lower stabilizer link stud with a 14mm wrench
    • Remove the nut from the stabilizer link with a 15mm hex socket
    • If the nut strips out, hold it in place with locking pliers and sawzall it off
  3. step : Reinstalling the Stabilizer Link (3:41)
    • Push the stabilizer link into place
    • Start the nuts by hand
    • Tighten the nuts
    • Torque the nuts to 29 foot-pounds
  4. step : Reattaching the Wheel (4:19)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Sawzall

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

4.67/ 5.0
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Quick way to tighten up front end
Kit is very complete, and tighten up the whole front end, ready for another 100k!
April 11, 2018
I received Parts on time but I was missing two parts out of it from where they fell out of the box and I called them that day and they replace the two part that was missing.
June 20, 2018
Perfect
This kit was so easy a caveman could do it. And we literally did. Amazingly made parts (compliment of an engineer) with an ease of installation. 10/10 would recommend
September 25, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2001Honda Civic Honda Civic Steering & Suspension Kit 8 Piece Set
2002-2005Honda Civic Honda Civic Steering & Suspension Kit 8 Piece Set (excluding SI Models)
Part #: 1ASFK02093


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:14 min)