Specifications:

  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

Direct Fit

All parts are direct fit, application-specific parts with no modifications required

Rigorously Tested

Rigorously tested and made from higher quality materials than the competition. Our parts are built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

Our parts are manufactured by some of the same factories that the OEMs use.

Prepackaged for Your Convenience

Our kits have been carefully put together to include all of the parts you need to get the job done, saving you both time and money. These kits also help take the guesswork out of finding the correct part for your vehicle’s steering or suspension system, allowing you to get started on your repair project faster.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

    We recommend an alignment after completing this repair

  1. step : Removing the Wheel (0:49)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:20)
    • Loosen the 24mm lock nut with a 21mm wrench and hammer
    • Make note of how far you turn the inner tie rod to turn it back for reinstallation
    • Remove the 24mm nut from the outer tie rod end
    • Remove the cotter pin with needle nose pliers
    • Remove the ball joint nut
    • Strike the steering knuckle with a hammer to loosen the outer tie rod
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (3:27)
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the castle nut onto the outer tie rod
    • Tighten the castle nut to 32 foot-pounds
    • Push the cotter pin through the castle nut
    • Twist the cotter pin into place with needle nose pliers
    • Make sure the inner tie rod is in its correct position
    • Hold the tie rod with an 18mm wrench
    • Tighten the 24mm lock nut
  4. step : Reattaching the Wheel (5:32)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 24mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 24mm Wrench

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
3
0
0
0
0
Honda parts purchase...
I was very happy with the parts purchased. It was a great deal and shipped on times. Arrived sooner than expected. I will for sure preserve from here again. Thanks again for the great service!
April 5, 2018
Purchased
2 months ago
Perfect
It fits perfect, hold the parts up to stock, it's right on, plus the price is just right, by buying this kit and installing everything myself, I saved $1000, gotta love it.
March 18, 2017
Purchased
1 year ago
Quality parts for the fraction of the price!!!
I got the front end kit and the rear brake kit. I thought I was going to get sub par replacement parts.. not the case!! The quality of replacement parts exceeded my expectations and I got more than I bargained for with a limited budget. Thank you
March 7, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
Will this fit 2002 Honda Odyssey 3.5l VTech cargo mini van 5 door?
Packm on Jan 29, 2018
BEST ANSWER: We do not currently carry this part for your vehicle. You can try searching a website called Partfinder.com, which you can find here: http://www.partfinder.com. If you have any questions about other parts we carry, please feel free to give us a call or send us an email.

Vehicle Fit

  • 2001 Honda Civic 10 Piece Set Steering & Suspension Kit
  • 2002-2005 Honda Civic 10 Piece Set Steering & Suspension Kit (excluding SI Models)

This part replaces:

  • OE # 51320SCVA91
  • OE # 51321SCVA91
  • OE # 51210S5AJ30
  • OE # 51215S5AJ30
  • OE # 51210S5AJ20
  • OE # 51215S5AJ20
  • OE # 51350S5AA20
  • OE # 51360S5AA20
  • OE # 51350S5AA10
  • OE # 51360S5AA10
  • OE # 51350S5AA03
  • OE # 51360S5AA03
  • OE # 51350S5AA02
  • OE # 51360S5AA02
  • OE # 51360S5A406
  • OE # 51350S5A306
  • OE # 51220S5A305
  • OE # 52320S5A013
  • OE # 52321S5A013
  • OE # 51220S5A003
  • OE # 51320S5A003
  • OE # 51321S5A003
  • OE # 53541S5A003
  • Moog K90332
  • Moog ES3581
  • Moog K90454
  • Moog K90455
  • Moog K90453
  • Moog K90452
  • Moog K640288
  • Moog K640287
  • Dorman 520-925
  • Dorman 520-926
  • Hollander 512-58745L
  • Hollander 512-58744R
  • OE # 51360-S5A-A20
  • OE # 51321-S5A-003
  • OE # 51320-S5A-003
  • OE # 51350-S5A-A20
Part #: 1ASFK01900


How-to Video:

(06:17 min)