• Brand New Steering & Suspension Kit
  • Comes as a 12 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Lower Control Arms
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 12 Piece Set
  • Kit Includes: (2) Front Sway Bar Links
  • Kit Includes: (2) Rear Sway Bar Links
  • Kit Includes: (2) Front Inner Tie Rods

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Please Note: Whenever replacing steering components, it is highly recommended to have a professional alignment performed on the vehicle afterwards.  Failure to do so may result in issues with steering and premature tire wear.

    We recommend an alignment after completing this repair

  1. step : Removing the Wheel (0:49)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:20)
    • Loosen the 24mm lock nut with a 21mm wrench and hammer
    • Make note of how far you turn the inner tie rod to turn it back for reinstallation
    • Remove the 24mm nut from the outer tie rod end
    • Remove the cotter pin with needle nose pliers
    • Remove the ball joint nut
    • Strike the steering knuckle with a hammer to loosen the outer tie rod
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (3:27)
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the castle nut onto the outer tie rod
    • Tighten the castle nut to 32 foot-pounds
    • Push the cotter pin through the castle nut
    • Twist the cotter pin into place with needle nose pliers
    • Make sure the inner tie rod is in its correct position
    • Hold the tie rod with an 18mm wrench
    • Tighten the 24mm lock nut
  4. step : Reattaching the Wheel (5:32)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 24mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 24mm Wrench

4.5 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Overall decent, but cheap replacement parts
I recently installed the entire kit on to my 2001 Civic. All the replacement parts fit properly and appeared almost identical to the stock parts. With one exception. The nuts provided on the sway bar end links are HORRIBLE! They are cheap and very poorly made, The bolts are not sized correctly and do not fit any socket size (I tried MET and I even tried STD sizes). The bolt was in between a 15mm and 16mm size. I ended up reusing the old bolts and everything worked out ok. Its too soon to tell how long they will last but so far (3 weeks in) they seem to bee OK
January 18, 2018
8 months ago
Exact fit
Thank you for providing the right parts at an excellent price!
November 16, 2017
9 months ago
Great parts, GREAT DEAL
Parts came in early, were fairly easy to apply and are durable. The price was exceptional and I am extremely satisfied with my purchase. The car drives smoother than previous. Put them on a 2001 Honda Civic Ex with 223,000 miles.
June 29, 2017
1 year ago
Steering and suspension kit
over all parts are ok but the ball joints did not fit my car due to grease nipple rub on drive shaft. 1A AUTO did refund me for it.
March 28, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 4 questions Browse 4 questions and 7 answers
Are these parts compatable with a Honda Civic Ex 4 door 1.7 liters ?
Mary O on Feb 23, 2017
BEST ANSWER: I do not know for sure, but they did work well on my 2002 honda civic ex coupe 2 door.
Will this fit 2001 civic lx?
Nate B on Jun 5, 2017
BEST ANSWER: Yes, these parts will work.
Hi do u guys have any videos on how to change an inner tie rod on a 2001 Honda Civic?
Cachito on Jun 5, 2016
BEST ANSWER: Sorry not at this time
Will this fit a 2002 Honda Civic LX Coupe?
Andrew B on May 12, 2016
BEST ANSWER: Yes this will fit your vehicle, this only does not fit the SI models. Give us a call or place an order online!

Vehicle Fit

Year Make Model Description
2001Honda Civic Honda Civic 12 Piece Set Steering & Suspension Kit
2002-2005Honda Civic Honda Civic Steering & Suspension Kit 12 Piece Set (excluding SI Models)

This part replaces:

  • Moog K90332
  • Moog ES3581
  • Moog K90454
  • Moog K90455
  • Moog K90453
  • Moog K90452
  • Moog EV469
  • Dorman 520-925
  • Dorman 520-926
  • Hollander 512-58745L
  • Hollander 512-58744R
  • Moog K640288
  • Moog K640287
Part #: 1ASFK01290

Out of Stock

How-to Video:

(06:17 min)