Honda Civic Steering & Suspension Kit - 1ASFK00661

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   10 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Lower Control Arms
      (2) Front Outer Tie Rods
      (2) Front Sway Bar Links
      (2) Front Inner Tie Rods


  • Brand New Steering & Suspension Kit
  • Comes as a 10 Piece Kit
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacements
  • Built to strict quality control standards

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

  1. step : Removing the Wheel (0:58)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Stabilizer Link (1:35)
    • Turn the wheel by hand
    • Clean off the threads with rust penetrant and a wire brush if necessary
    • Hold the lower stabilizer link stud with a 14mm wrench
    • Remove the nut from the stabilizer link with a 15mm hex socket
    • If the nut strips out, hold it in place with locking pliers and sawzall it off
  3. step : Reinstalling the Stabilizer Link (3:41)
    • Push the stabilizer link into place
    • Start the nuts by hand
    • Tighten the nuts
    • Torque the nuts to 29 foot-pounds
  4. step : Reattaching the Wheel (4:19)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    Allen Wrenches

  • 5mm Allen Wrench

  • General Tools

  • Sawzall

  • Ratchets & Related

  • Ratchet
  • Socket Extensions
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench

4.80/ 5.0
5 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Great for the price everything fit right and quick delivery
June 29, 2017
The place to buy parts
fast shipping Quality Parts an awesome service thanks look forward to doing more business with you guys
July 8, 2017
Thanks to you guys, I’m glad that my car is running so smoothly an stability is great. Thanks ????
October 2, 2017
The order arrived when it was supposed to and all of the parts matched. The installation videos make this well worth the effort and savings!
November 6, 2017
Tip: You need a 29mm crows feet wrench and be able to grind it for the inner tie rods
I gave this four stars based on the inner tie rods. First, one of the inner tie rods came with smashed threads and had to wait 5 days to get a replacement, check all your threads when the parts arrive to save time if you need a replacement. Also, the inner tie rods are not the same as the OEM ones. The area where you tighten the tie rod in is smaller on the 1A part and to tighten it down I had to grind my wrench so it would fit. I think that explains why they dont have a video explaining how to install it. (at least I couldnt find one by them) The tube type tool for the tie rods wont work because a nut behind it wont let the tool fit in so you will need a 29mm crows feet wrench and the wrench is too thick to tighten the shorter area on the new ones hence grinding it down. I took pictures to explain what I mean but you cant post them on here so just wait and youll know what I mean. Everything else worked fine.
June 15, 2018
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
Are the bushings already installed on the lower control arms?
Ron S March 20, 2016
Brian F March 21, 2016
Ricardo M March 23, 2016
C A March 30, 2018
Year Make Model Description
2001Honda Civic Honda Civic 10 Piece Set Steering & Suspension Kit
2002-2005Honda Civic Honda Civic (excluding SI Models) 10 Piece Set Steering & Suspension Kit
Part #: 1ASFK00661

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(05:14 min)