1ASFK02276-Honda Civic Steering & Suspension Kit 4 Piece Set

Replaces

Honda Civic Steering & Suspension Kit 4 Piece Set TRQ PSA56275

1ASFK02276

Part Details

  • Kit Includes: (2) Front Lower Ball Joints
  • Kit Includes: (2) Front Outer Tie Rods
  • Quantity: 4 Piece Set

This part replaces:

  • Moog K90332
  • Moog ES3581
  • OE # 53541S5A003
  • OE # 51220S5A003
FREE SAME DAY SHIPPING
Save 37%
List: $48.95 Save: $18.00
Part 1ASFK02276
In Stock


Orders must be placed by 2pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.

TRQ
Brand #: PSA56275
Description
Vehicle Fit
Warranty & Shipping
How-To & Tools
Q&A

Part Details

  • Quantity:   4 Piece Set
  • Kit Includes:
      (2) Front Lower Ball Joints
      (2) Front Outer Tie Rods

Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.

Direct Fit

Application-specific, with no modifications required.

Rigorously Tested

Made from higher quality materials than the competition. Built to have a longer life in any environment or road conditions.

State of the Art Manufacturing

By the same factories that the OEMs use.

Prepackaged for Your Convenience

Carefully assembled to include all of the parts you need, saving time and money.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.

Note: When replacing steering components, it is recommended to have a professional alignment performed on the vehicle afterwards. This will ensure proper tracking and even tire wear.

    We recommend an alignment after completing this repair

  1. step : Removing the Wheel (0:49)
    • Loosen the 19mm lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Removing the Outer Tie Rod (1:20)
    • Loosen the 24mm lock nut with a 21mm wrench and hammer
    • Make note of how far you turn the inner tie rod to turn it back for reinstallation
    • Remove the 24mm nut from the outer tie rod end
    • Remove the cotter pin with needle nose pliers
    • Remove the ball joint nut
    • Strike the steering knuckle with a hammer to loosen the outer tie rod
    • Twist off the outer tie rod by hand
  3. step : Installing the New Outer Tie Rod (3:27)
    • Twist the new outer tie rod onto the inner tie rod
    • Push the outer tie rod into the steering knuckle
    • Fasten the castle nut onto the outer tie rod
    • Tighten the castle nut to 32 foot-pounds
    • Push the cotter pin through the castle nut
    • Twist the cotter pin into place with needle nose pliers
    • Make sure the inner tie rod is in its correct position
    • Hold the tie rod with an 18mm wrench
    • Tighten the 24mm lock nut
  4. step : Reattaching the Wheel (5:32)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the 19mm lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 80 foot-pounds in a crossing or star pattern

Tools needed for replacement:

    General Tools

  • Hammer

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Torque Wrench
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 24mm Socket
  • 17mm Socket

  • Wrenches - Metric

  • 21mm wrench
  • 24mm Wrench

Need help? Ask one of our Auto Experts
Need help? Ask one of our Auto Experts
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.

Fits the following Makes:

Year Make Model Description
2001Honda Civic Honda Civic Steering & Suspension Kit 4 Piece Set
2002-2005Honda Civic Honda Civic HX Steering & Suspension Kit 4 Piece Set
2002-2005Honda Civic Honda Civic GX Steering & Suspension Kit 4 Piece Set
2002-2005Honda Civic Honda Civic EX Steering & Suspension Kit 4 Piece Set
2002-2005Honda Civic Honda Civic DX Steering & Suspension Kit 4 Piece Set
2002-2005Honda Civic Honda Civic Value Package Steering & Suspension Kit 4 Piece Set
2002-2005Honda Civic Honda Civic LX Steering & Suspension Kit 4 Piece Set
2003-2005Honda Civic Honda Civic Hybrid Steering & Suspension Kit 4 Piece Set
2005Honda Civic Honda Civic EX Special Edition Steering & Suspension Kit 4 Piece Set
2005Honda Civic Honda Civic LX Special Edition Steering & Suspension Kit 4 Piece Set

Part Interchange

Brand Label Part Number
DIY Solutions SUS00178
DIY Solutions SUS07471
MOOG K90332
MOOG ES3581
MOOG Chassis Products ES3581
MOOG Chassis Products K90332

This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.

FREE SAME DAY SHIPPING
TRQ
Brand #: PSA56275
Product Reviews
There are no reviews for this item.
Customer service

877-844-3393

Monday - Friday 8:00am - 9:30pm ET
Saturday - Sunday 8:00am - 4:30pm ET


Honda Civic Steering & Suspension Kit 4 Piece Set TRQ PSA56275-1ASFK02276 does not fit your:


Before proceeding,

select your Vehicle, to verify this Part will fit.

This part will only fit a vehicle with these options.