Replaces

Honda Civic Odyssey Door Lock Cylinder Pair Honda OEM 72146-S0X-A51, 72145-S0X-A51 - 1ADRK00131

Specifications:

  • Brand New Honda Door Lock Cylinder
  • Comes as a Pair
    • Fits LH (Driver Side) & RH (Passenger Side)
  • Direct replacement
  • Built to strict quality control standards
OEM Part

Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.

Part Details

  • Includes: Keys
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Door Panel (0:42)
    • Loosen the negative battery terminal with a 10mm wrench
    • Pry up the trap door in the door pull with a flat blade screwdriver
    • Remove the Phillips screw in the door pull
    • Pry off the trap door in the door handle with a flat blade screwdriver
    • Remove the two Phillips screws in the door handle
    • Pry up the power window switch
    • Disconnect the switch wiring harnesses
    • Pull the door handle out and remove the door handle rod
    • Disconnect the door handle wiring harness
    • Remove the two Phillips screws previously behind the door pull
    • Remove the sail panel
    • Pry out the door panel with a door panel clip tool or putty knife
    • Lift the door panel up and off
    • Remove the pins from the water shield with needle nose pliers
    • Carefully remove the water shield
  2. step : Removing the Door Handle (3:23)
    • Remove the two 10mm bolts from the window
    • Lift the window up and out
    • Remove the 10mm bolt from the bottom of the window track
    • Move the window track out of the way
    • Unlatch the latch rod clip
    • Remove the two 10mm nuts from the door handle
    • Push down on the retaining clip with a flat blade screwdriver
    • Pull the retaining clip down with a bent tip pick tool to loosen the lock cylinder
    • Pry out the door lock cylinder with a flat blade screwdriver
    • Remove the plate
    • Remove the door handle
  3. step : Removing the Door Lock Cylinder (6:09)
    • Disconnect the white clip from the door lock cylinder with a flat blade screwdriver
  4. step : Installing the Door Lock Cylinder (6:53)
    • Attach the door lock cylinder to the rod
  5. step : Installing the Door Handle (7:05)
    • Insert the door handle into place
    • Insert the plate into place
    • Hand tighten the 10mm nuts
    • Insert the door lock cylinder into the door handle
    • Reclip the latch rod
    • Tighten the two 10mm nuts
    • Insert the window track into place
    • Tighten the 10mm bolt to the window track
    • Insert the window
    • Tighten the two 10mm bolts to the window
  6. step : Installing the Door Panel (10:07)
    • Replace the water shield and its clips
    • Lift the door panel into place
    • Push in the door panel clips
    • Insert the sail panel into place
    • Insert the two Phillips screws into the door
    • Connect the wiring harness to the power window switch
    • Press the window switch into place
    • Connect the door lock switch to the door handle
    • Connect the door rod into the handle
    • Press the handle into place
    • Tighten the two Phillips screws to the door handle
    • Insert the trim panel into the door handle
    • Tighten the Phillips screw in the door pull
    • Press the trap door into the door pull

Tools needed for replacement:

    General Tools

  • Pick

  • Pliers, Cutters & misc Wrenches

  • Needle nose pliers

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Wrenches - Metric

  • 10mm Wrench

1.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
0
0
1
Terrible experience
Locks were correct, but two separate keys for one vehicle, I will never do business with this company
July 27, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 3 answers
Do the keys fit both locks, or will I have to use a different key for each cylinder?
Kurt D on Mar 17, 2018
BEST ANSWER: The lock cyl I got for a two door Civic came keyed different. Thankfully my customer didn't mind, and was happy . Me personally, I would spend the extra money to have them with the same keys

Vehicle Fit

Year Make Model Description
2003-2005Honda Civic Honda Civic Coupe Door Lock Cylinder with Keys Pair Honda OEM 72146-S0X-A51, 72145-S0X-A51
2003-2004Honda Civic Honda Civic Sedan Front Door Lock Cylinder with Keys Pair Honda OEM 72146-S0X-A51, 72145-S0X-A51
2004-2005Honda Civic Honda Civic Hatchback Front Door Lock Cylinder with Keys Pair Honda OEM 72146-S0X-A51, 72145-S0X-A51
2003-2004Honda Odyssey Honda Odyssey Front Door Lock Cylinder with Keys Pair Honda OEM 72146-S0X-A51, 72145-S0X-A51

This part replaces:

  • Honda OEM 72146-S0X-A51, 72145-S0X-A51
  • OE # 72146S0XA51
  • OE # 72145-S0X-A51
Only 1 left in stock
Part #: 1ADRK00131


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Brand #: 72146-S0X-A51, 72145-S0X-A51

How-to Video:

(13:36 min)