Replaces

Honda Civic FIT Insight Brake Drum Rear Pair - 1ABDS00256

These brake drums are just what you need to get your vehicle stopping in good order again!

Specifications:

  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) REAR
  • Replaces dealer part numbers: 42610S5A000, 42610 S5A 000, 42610TM8A00, 42610 TM8 A00
  • Direct replacements
  • Fits 4 lug wheels
  • Correct shoe size: 7.875" x 1.375"

These brake drums make great replacements and have excellent value over the price of dealer brake drums.

Part Details

  • Front or Rear Location: Rear
  • Quantity: Pair

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:54)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull of the wheel
  2. step : Removing the Brakes (1:20)
    • Pull off the brake drum
    • Remove the springs with locking needle-nose pliers
    • Push the piston in by hand and lock the rubber in place
    • Remove the tabs with the pliers
    • Pull the brake shoes apart
    • Remove the front brake shoe
    • Remove the separator bar
    • Pull the rear brake shoe off the emergency brake cable
    • Remove the emergency brake lever from the rear brake shoe
  3. step : Installing the Brakes (3:59)
    • Connect the emergency brake lever to the new rear brake shoe
    • Attach the rear brake shoe to the emergency brake cable
    • Apply white grease to the contact areas on the backing plate
    • Put the rear shoe into place
    • Insert the tab
    • Make sure the separator bar adjusts freely
    • Insert the separator bar
    • Attach the front shoe to the rear shoe via the spring
    • Put the front shoe into place
    • Insert the tab
    • Reattach the springs with the pliers
    • Slide the brake drum on
  4. step : Reattaching the Wheel (7:37)
    • Slide the wheel into place
    • Put the hub cap on
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to between 100 foot-pounds in a crossing or star pattern
    • Reattach the center cap
  5. step : Testing the Brakes (8:08)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Jack Stands
  • Floor Jack

  • Materials, Fluids, and Supplies

  • White Grease

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench
  • Vise Grip Pliers

  • Ratchets & Related

  • Torque Wrench
  • A Piece of Pipe (for leverage)
  • Ratchet
  • 1/2 Inch Breaker Bar

  • Sockets - Metric

  • 19mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2001-2005Honda Civic Honda Civic Brake Drum Rear Pair L4 1.7L
2009-2010Honda FIT Honda FIT Brake Drum Rear Pair
2010-2014Honda Insight Honda Insight Brake Drum Rear Pair
Part #: 1ABDS00256


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(08:38 min)