This replacement radiator is just what you need to get your vehicle in working order again.

Specifications:

  • Direct replacement
  • Built to strict quality control specifications
  • Engineered for optimum heat-transfer performance and fit
  • 100% tested prior to leaving factory
  • Proper fittings for transmission lines (if needed)

This part is built to strict quality control standards. Makes a great replacement and has substantial cost savings over a dealer unit.

Packaging:

Radiators may incur bent cooling fins or small imperfections during shipping or manufacturing. A few bent fins or small dents and scratches do not affect the fit or the function of the part. Neither our 60 Day satisfaction guarantee, nor the manufacturer's warranty, cover these types of insignificant damages.

Direct Fit Replacement

Direct fit replacement radiator with core thickness that is equal to the OE radiator.  Other manufacturers make the radiator's core slightly thinner than the OEM to save money.  This decreases the overall performance and lifespan of the part.

Premium Aluminum Core

Engineered for top performance with a premium core that provides efficient cooling and heat-transfer.

100% Leak Tested

100% leak tested and built to strict quality control standards.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Draining the Radiator (0:47)
    • Raise and secure the vehicle
    • Have a drain pan ready
    • Turn the drain plug
    • Twist off the radiator cap
    • Allow the radiator to drain
  2. step : Removing the Coolant Tank (1:15)
    • Disconnect the coolant tank hose from the radiator
    • Lift the coolant tank up and out
  3. step : Removing the Radiator (1:23)
    • Loosen the upper radiator hose clamp with pliers
    • Pull the upper radiator hose off the radiator
    • Disconnect the radiator fan wiring harness
    • Remove the four 10mm bolts from the splash shield
    • Pull down the splash shield
    • Loosen the three lower radiator hose clamps
    • Remove the three lower hoses from the radiator
    • If necessary, apply penetrating oil to help slide off the hoses
    • Remove the 10mm bolt from the radiator bracket
    • Lift the radiator up and out
  4. step : Preparing the New Radiator (4:11)
    • Remove the four 10mm bolts that hold the fan to the old radiator
    • Pull the fan off the old radiator
    • Put the fan onto the new radiator
    • Insert the four 10mm bolts into the radiator fan
  5. step : Installing the New Radiator (4:37)
    • Lower the radiator feet onto the lower radiator brackets
    • Put the top radiator bracket into place
    • Insert the 10mm bolt into the radiator bracket
    • Connect the radiator fan wiring harness
    • Push the upper radiator hose onto place
    • Tighten the upper radiator hose clamp with pliers
    • Put the lower radiator hoses into place
    • Tighten the lower radiator hose clamps with pliers
    • If you have replaced the hose clamps you may need to tighten them with a flat blade screwdriver
    • Push the splash shield into place
    • Insert the four 10mm bolts into the splash shield
  6. step : Reinstalling the Coolant Tank (5:58)
    • Tighten the drain plug
    • Push the coolant tank into place
    • Connect the coolant tank hose to the radiator
  7. step : Refilling the Radiator (6:09)
    • Add coolant to the radiator using a funnel
    • Twist on the radiator cap
    • Run the engine briefly
    • Twist off the coolant tank cap
    • Add coolant to the tank using a funnel
    • Twist on the coolant tank cap
    • Drive the vehicle briefly
    • Add coolant as necessary

Tools needed for replacement:

    General Tools

  • Drain Pan
  • Floor Jack
  • Funnel
  • Jack Stands

  • Materials, Fluids, and Supplies

  • Rust Penetrant

  • Pliers, Cutters & misc Wrenches

  • Slip-Joint Pliers

  • Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Flat Blade Screwdriver

4.3 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
2
0
1
0
0
Radiator
Good price easy to install so easy not need instructions or video perfect match thank you
January 23, 2017
Purchased
1 year ago
This replacement fit in exactly as the original. Only issue was the two nipples for the transmission cooler. Since I have a standard transmission these ending up being a nuisance. Informed that all after market come with the attachments for the auto transmission. If that's the case the caps to seal these off should come with the unit.
August 27, 2017
Purchased
8 months ago
Exact fit for my 1998 Honda Civic LX
This took me all of 20 minutes to pull the bad one, install this PERFECT match radiator, and fill it up.

Works perfectly, and the price was almost too good to be true.

Save at LEAST $300 replacing it myself through 1 A auto's video's and parts!

Thanks guys!
August 4, 2017
Purchased
10 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Does this come with a cap?
Fitzy on Jan 7, 2017
BEST ANSWER: Hello Steve. This radiator does not come with a cap, so you can either reuse the original or purchase one locally.

Vehicle Fit

  • 1992-2000 Honda Civic Radiator SOHC L4 1.6L
  • 1992-1995 Honda Civic Radiator L4 1.5L
  • 1993-1995 Honda Civic Del Sol Radiator L4 1.5L
  • 1993-1997 Honda Civic Del Sol Radiator SOHC L4 1.6L

This part replaces:

  • Spectra Premium Industries CU1290
  • Partslink HO3010123
  • Partslink HO3010125
  • Partslink HO3010126
  • Partslink HO3010128
  • Partslink HO3010134
Part #: 1ARAD00011

Out of Stock

How-to Video:

(06:58 min)