Honda Civic Civic Del Sol Radiator & A/C Condenser Cooling Fan Assembly Pair - 1ARFK00022

Our aftermarket cooling fan motors are some of the highest quality replacements on the market! This radiator fan motor is a direct replacement part.

Specifications

• Comes as a PAIR
  • Fits LH (Driver Side) and RH (Passenger Side)
    
• New, not rebuilt, electric motors
• Performance tested
• Direct bolt in replacements
• No core charge

Now you can buy a high quality cooling fan motor pair that is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer set.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Item Condition: New

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

step : Removing the Radiator Fan (0:40)

• Disconnect the radiator overflow hose with a flat blade screwdriver
• Pull the overflow reservoir bottle up and out
• Push the teeth together on the radiator hose clamp with pliers
• Slide the radiator hose clamp back
• Remove the upper radiator hose
• Disconnect the radiator fan harness
• Remove the 10mm bolts at the top of the radiator fan
• Remove the four 10mm bolts from the splash guard beneath the car
• Remove the splash guard
• Remove the two 10mm bolts beneath the radiator fan

step : Installing the New Radiator Fan (2:34)

• Lower the radiator fan into place
• Insert and tighten the two 10mm bolts on top of the radiator fan
• Insert and tighten the two 10mm bolts on the bottom of the radiator fan
• Reconnect the radiator fan wiring harness
• Push the upper radiator hose into place
• Slide the hose clamp forward on the upper radiator hose with pliers
• Insert the splash guard into place
• Insert and tighten the four 10mm bolts on the splash guard
• Tighten the coolant drain
• Push the coolant reservoir bottle into place
• Connect the radiator overflow hose