Replaces

Honda Civic Civic Del Sol CRX Brake Kit Nakamoto CD273, 31029 - 1ABFS02000

Brake Rotor Specifications:

  • Comes as a PAIR
    • Includes LH (Driver Side) & RH (Passenger Side) FRONT
  • Direct replacement
  • 4 Wheel Stud Holes
  • 240mm Diameter Rotors

Brake Pad Specifications:

  • 4 Piece Front Brake Pad Set
  • Professional Grade Ceramic Brake Pads
  • Direct replacement

Premium Positive Molded Brake Pads Features and Benefits:

  • The very same manufacturing process the original equipment manufacturers use
  • High density friction material for long pad life
  • Less resin content virtually eliminates brake fade and glazing
  • Reduced dusting for both Ceramic and Semi-metallic materials
  • Quality multi-layered shims and pad chamfering provide smooth and quiet braking

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (0:51)
    • Loosen the lug nuts with the vehicle on the ground
    • Raise the vehicle with a floor jack
    • Secure the vehicle on jack stands
    • Remove the lug nuts
    • Pull off the wheel
  2. step : Inspecting the Brakes (1:12)
    • Check for gouges on both sides of the rotor
    • Check the thickness of the brake pads
    • Check the brake pad wear indicator
  3. step : Removing the Brake Pads (1:26)
    • Remove the two 12mm bolt from the brake caliper
    • Pry the brake pads into the caliper with a flat blade screwdriver to push in the pistons
    • Pull the caliper aside
    • Pull the brake pads off by hand
  4. step : Removing the Brake Rotor (1:59)
    • Remove the two 17mm bolts from the brake caliper bracket
    • Pull off the brake caliper bracket
    • Remove the two Phillips head plugs from the rotor with a Phillips bit and ratchet or an impact screwdriver and hammer
    • Pull the rotor off
  5. step : Preparing the New Brake Pads and Rotors (2:35)
    • Clean the rotor with brake parts cleaner or mineral spirits
    • Apply grease to the brake pad tabs
    • Apply grease to the caliper slides
    • Clean the brake pad slides with a wire brush
  6. step : Installing the New Brake Rotor (3:20)
    • Put an old pad in the caliper
    • Use a large C-clamp and the old pad to push the pistons back
    • Slide the rotor on
    • Insert the two Phillips head plugs into the brake rotor
    • Put the bracket back into place
    • Start the 17mm bolts by hand
    • Tighten the bolts to 85 foot-pounds of torque
  7. step : Installing the New Brake Pads (4:14)
    • Apply grease to the brake caliper slides
    • Install the new brake pads into the bracket
    • Put the caliper on
    • Thread the 12mm bolt by hand
    • Tighten the 12mm bolt
  8. step : Reattaching the Wheel (5:01)
    • Slide the wheel into place
    • Start the lug nuts by hand
    • Tighten the lug nuts preliminarily
    • Lower the vehicle to the ground
    • Tighten the lug nuts to 100 foot-pounds in a crossing or star pattern
  9. step : Testing the Brakes (5:20)
    • Pump your brakes repeatedly until they feel firm
    • Test your brakes at 5 miles per hour and then 10 miles per hour
    • Road test the vehicle

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Mineral Spirits
  • Bearing Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Pipe Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Impact Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 12mm Socket

5.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
1
0
0
0
0
Great brakes, great price!
I can't believe I was able to get an entire front brake set shipped to my house (quickly) for under $60. 1A continues to impress me. Quality parts, quick and no hassle. Keep up the good work!
October 30, 2017
Purchased
4 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

How-to Video:

(05:54 min)

Tools List:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp
  • Hammer
  • Wire Brush

  • Materials, Fluids, and Supplies

  • Mineral Spirits
  • Bearing Grease
  • Brake Parts Cleaner

  • Pliers, Cutters & misc Wrenches

  • Pipe Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Impact Screwdriver

  • Sockets - Metric

  • 17mm Socket
  • 19mm Socket
  • 12mm Socket



This part replaces:

  • Nakamoto CD273, 31029

Vehicle Fit

  • 1990-1991 Honda CRX Front Premium Posi Ceramic Brake Kit Nakamoto
  • 1990-1993 Honda Civic Front Premium Posi Ceramic Brake Kit excluding EX Models Nakamoto
  • 1994-2000 Honda Civic Front Premium Posi Ceramic Brake Kit excluding EX Models excluding SI Models Nakamoto
  • 1993-1997 Honda Civic Del Sol Front Premium Posi Ceramic Brake Kit without ABS Brakes Nakamoto
Part #: 1ABFS02000

Ships Same Day for orders placed by 4 P.M. ET

Nakamoto
Brand #: CD273, 31029

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More