This Windshield Wiper Switch without Delay Function is a new, aftermarket replacement part. It is designed to REPLACE original units that are prone for failure. It's just what you need to get your vehicle in good working order again!

Specifications:

  • Controls the following functions:
    • Windshield Wiper without Delay Function
    • Windshield Washer
  • Black finish on handle
  • Exact replacement
  • Design improved for more durability
  • Detailed graphics
  • Built to strict quality control standards
  • 7 Terminal Connection

This Windshield Wiper Switch makes great replacement and has good cost savings over a dealer unit.

 

Our electrical and electronic parts are subject to strict quality control testing .  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Disconnect the battery (0:47)
    • Use an 8 mm wrench to disconnect the negative battery terminal
  2. step : Remove the steering column trim (1:00)
    • There are three Phillips screws to remove.
  3. step : Remove the wiper switch (1:56)
    • Pry apart the two steering column trim pieces.
    • Turn the wheel to access the two Phillips screws at the base of the wiper switch.
    • Pry out the wiper switch by using a flat blade screwdriver to depress the tab.
    • Unplug the wiring harness.
  4. step : install the new wiper switch (2:42)
    • Plug in the wiring harness and clip the switch down into the steering column.
    • Secure with the two Phillips screws.
  5. step : Re-install the steering column trim (3:28)
    • Clip the two steering column trim pieces back on
    • secure with the three Phillips screws.
    • Reconnect the negative battery terminal with your 8 mm wrench.

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 8mm Wrench

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
So does it have the wiper speeds? Or can you explain the "excluding delay wipers"
Boyinblue on May 28, 2016
BEST ANSWER: Intermittant, high and low.....thats all

How-to Video:

(04:41 min)

Tools List:

    Screwdrivers & Related

  • Flat Blade Screwdriver
  • Phillips Head Screwdriver

  • Wrenches - Metric

  • 8mm Wrench



This part replaces:

  • OE # 35256SM4G81
  • OE # 35256SM4A21
  • Standard Motor Products DS-1055

Vehicle Fit

  • 1992-1993 Honda Accord Windshield Wiper Switch excluding Wagon
  • 1994-2002 Honda Accord Windshield Wiper Switch for Models without Delay Wipers
Only 2 left in stock
Part #: 1AZMX00045

Ships Same Day for orders placed by 4 P.M. ET

We're here to help

1A Auto Parts

Customer Feedback

"Thanks for the fast reliable service. Great price, and the headlights were as good as oem or better!!! Keep up the good work..."
- Dwuan M.
Read More