This headlight & turn signal lever is a new, aftermarket replacement part. It is designed to REPLACE original units that are prone for failure. It's just what you need to get your vehicle in good working order again!

Specifications:

  • Controls the following functions:
    • Turn Signal
    • High Beam
    • Headlights
  • Black finish on handle
  • Replaces dealer part numbers: 35255-SM5-A01, 35255SM5A01
  • Exact replacement
  • Design improved for more durability
  • Detailed graphics
  • Built to strict quality control standards

This combination turn signal lever & headlight switch makes great replacement and has good cost savings over a dealer unit.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Headlight Switch (0:49)
    • Disconnect the negative battery cable.
    • Remove the three Phillips screws under the steering column.
    • Pull the top panel up.
    • Pull the bottom panel out and off.
    • Turn the wheel.
    • Remove the two Phillips screws for the switch.
    • Pry the switch out.
    • Disconnect the harness.
  2. step : Replacing the Headlight Switch (2:20)
    • Reconnect the harness and push the switch back into place.
    • Replace the Phillips screws.
    • Replace the steering column panels.
    • Replace the three Phillips screws.
    • Replace the negative battery cable.

Tools needed for replacement:

    Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Can you connect this to a direct wiring that has the wires sodered to the back plate?
Latch on Jun 18, 2017
BEST ANSWER: We may not guarantee this because of the plug in set up.

Vehicle Fit

  • 1990-1991 Honda Accord Wagon Combination Switch
  • 1992-1995 Honda Accord Combination Switch
  • 1992-1995 Honda Prelude Combination Switch

This part replaces:

  • Standard Motor Products DS-794
Only 1 left in stock
Part #: 1AZHS00233

How-to Video:

(04:28 min)