Replaces

Honda Accord Brake Kit Front Raybestos SGD465C, 96111R - RABFS00065

RAYBESTOS SERVICE GRADE FRONT BRAKE PAD & ROTOR KIT: SGD465C, 96111R

The Raybestos® brand is a name firmly rooted in a proud tradition of innovative product design and manufacturing excellence. The premier brand of replacement products since 1902, the Raybestos® brand name has changed the way people think about brake products and brake performance with continual innovations and dedication to quality.

Brake Pad Specifications:

  • Brand New Raybestos Service Grade Front Brake Pad Set
  • Material: Ceramic
  • Shims, slots and chamfers like OE
  • Engineered for safe, quiet braking

Brake Rotor Specifications:

  • Brand New Raybestos Brake Rotors
  • Comes as a PAIR
    • Fits both LH (Driver Side) & RH (Passenger Side) Front
  • Direct replacements
  • 4 wheel stud holes
  • 10.2" (259.5mm) Diameter Rotors

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

Wear and Tear

This item is backed by a warranty against defects in materials and workmanship under its intended use. The warranty does not cover normal wear and tear. Please keep your invoice for proof of this warranty.

  1. step : Removing the Wheel (1:00)
    • Remove center cap
    • While your car is still on the ground, use your 21mm socket to loosen your lug nuts
    • Jack up and secure your car with jack stands
    • Remove the lug nuts with your 21mm socket and ratchet
    • Remove the wheel and set aside
  2. step : Removing the Calipers (1:30)
    • Remove the 14mm bolts to remove the calipers
    • Use a wire tie to fasten the caliper out of the way
    • Use your 17mm socket and ratchet to remove your caliper brackets
    • Pop out your brake pads
  3. step : Install New Pads (4:07)
    • Check your caliper pins to make sure they are in good working order
    • Put your caliper bracket back on, and tighten the 17mm bolts to 70 ft lbs
    • Insert your new pads into the brackets
    • Use your C-clamp or caliper tool to compress your caliper
    • Place your caliper onto the bracket
    • Tighten your 14mm bolts
  4. step : Replacing the Wheel (7:25)
    • Make sure to use a star pattern when putting your wheel lugs back on
    • Tighten to 75-85 ft lbs
    • Replace center cap
  5. step : Testing the Brakes (8:20)
    • Before driving the car again, start it up and pump the brakes a few times to get the pistons in the brakes in place
    • Test the brakes in your driveway before taking the car onto the road

Tools needed for replacement:

    General Tools

  • Floor Jack
  • Jack Stands
  • Large C-Clamp

  • Pliers, Cutters & misc Wrenches

  • Lug Wrench

  • Ratchets & Related

  • Ratchet
  • Torque Wrench

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 21mm Socket

There are no reviews for this item. Write Review
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1990-1993 Honda Accord Sedan Front Brake Kit Ceramic for Models with Akebono Calipers Raybestos SGD465C, 96111R
  • 1993-1994 Honda Accord Coupe Front Brake Kit Ceramic Raybestos SGD465C, 96111R
  • 1995-1997 Honda Accord Front Brake Kit Ceramic L4 2.2L Models excluding Wagon Raybestos SGD465C, 96111R

This part replaces:

  • Raybestos SGD465C, 96111R
  • OE # 45022SY8A02
  • OE # 45022SY8A01
  • OE # 45022SY8A00
  • OE # 45022SM4A00
  • OE # 45251SM4020
  • OE # 45251SM4010
  • OE # 45251SM4000
Part #: RABFS00065

Out of Stock

Raybestos
Brand #: SGD465C, 96111R

How-to Video:

(09:04 min)