Replaces

Honda Accord Acura TSX Front Driver Side Lower Control Arm - 1ASLF00189

Frequently bought together

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This replacement front lower control arm is just what you need to bring back the safety and integrity of your vehicle's suspension and steering.

Specifications:

  • Fits the LH (Driver Side) FRONT LOWER
  • Arm includes both bushings
  • Direct replacement
  • Built to strict quality control standards

Worn control arm bushings can cause excessive front tire wear, popping or creaking in the front end, extra play in the steering system, and pose a serious safety concern. Replace that heavily rusted, rotted, or damaged front lower control arm with the loose bushings with our high quality all in one replacement.

Our control arms are designed to be direct replacements for the original factory parts.  They are 100% brand new and require no modifications for installation.  No special tools are required because all of the bushings come pre-installed.

Item Condition: New

Attention California Customers:

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Removing the Wheel (0:26)
    • Partially raise the vehicle with the wheel still contacting the ground
    • Loosen the 19 mm lug nuts
    • Raise and support the vehicle on jack stands
    • Remove the lug nuts
    • Replace one lug nut loosely
    • Hammer the tire from the back side if the wheel is stuck
    • Remove the last lug nut and the wheel
  2. step : Removing the Lower Control Arm (1:25)
    • Remove the 17 mm bolt from the rear inner joint of the lower control arm
    • Remove the cotter pin from the lower ball joint
    • Remove the 17 mm castle nut from the lower ball joint
    • Hammer on the knuckle, or use a ball joint removing tool to separate the lower control arm from the lower ball joint
    • Remove the 14 mm nuts from the sway bar link, and remove it
    • Remove the 17 mm nut from the 17 mm lower strut wishbone bolt, and remove the bolt
    • Remove the 19 mm bolt from the front inner lower control arm joint
    • Remove the lower control arm
  3. step : Installing the Lower Control Arm (8:44)
    • Install the lower control arm by inserting the front joint first, and then rotating the control arm around to insert the rear joint
    • Install the 17 mm bolt into the rear joint
    • Align the lower strut wishbone and install the 19 mm bolt and 19 mm nut
    • Insert the ball joint stud into the lower control arm
    • Replace the 17 mm castle nut on the lower control arm stud
    • Install the 19 mm bolt into the front lower control arm joint
    • Torque the lower strut wishbone 17 mm nut to 47 ft-lb
    • Torque the 17 mm bolt in the rear lower control arm joint to 47 ft-lb
    • Torque the 19 mm bolt in the front lower control arm joint to 61 ft-lb
    • Torque the lower ball joint castle nut between 58 and 65 ft-lb, then continue tightening it to align the castle nut with the cotter pin hole
    • Install the cotter pin and peen it over the nut
    • Insert the upper sway bar link into the sway bar and thread the 14 mm nut onto it
    • Insert the lower sway bar link into the lower control arm and thread the 14 mm nut onto it
    • Tighten the nuts, carefully using locking pliers, or a hex wrench, if the studs spin
    • Torque the sway bar link nuts to 22 ft-lb, if able
  4. step : Installing the Wheel (16:50)
    • Slide the wheel onto the lug nuts
    • Replace the lug nuts and tighten them in a star pattern
    • Lower the vehicle with the wheel lightly touching the ground
    • Torque the lug nuts in a star pattern to 80 ft-lbs
    • Lower the vehicle completely

Tools needed for replacement:

    General Tools

  • Hammer
  • Jack Stands
  • Floor Jack

  • Pliers, Cutters & misc Wrenches

  • Locking Pliers

  • Ratchets & Related

  • Torque Wrench
  • Ratchet

  • Screwdrivers & Related

  • Pry Bar

  • Sockets - Metric

  • 14mm Socket
  • 17mm Socket
  • 19mm Socket

  • Wrenches - Metric

  • 14mm Wrench
  • 17mm Wrench
  • 19mm Wrench

4.50/ 5.0
2 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Lower control arm assembly
Lower control arm that I ordered fit perfect will definitely purchase again if needed
June 18, 2018
Happy with the service
The part arrived on time at a competitive price and fit properly. You cant ask for more. A relief after the nightmare from a competitor !!!!
September 4, 2019
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2004-2008Acura TSX Acura TSX Front Driver Side Lower Control Arm
2003-2007Honda Accord Honda Accord Front Driver Side Lower Control Arm
Part 1ASLF00189
In Stock


Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost


Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.