Honda Accord Acura CL 5 Blade Fan Radiator & A/C Condenser Cooling Fan Assembly Pair - 1ARFK00023

Frequently bought together

Warranty & Shipping
How-To & Tools
Product Reviews
Vehicle Fit

Part Details

  • Quantity:   Pair
  • Fan Blade Count:   5 Blade Fan

Our aftermarket cooling fan motors are some of the highest quality replacements on the market! This radiator fan motor is a direct replacement part.


  • Comes as a PAIR
    • Fits LH (Driver Side) and RH (Passenger Side)
  • New, not rebuilt, electric motors
  • Performance tested
  • Direct bolt in replacements
  • No core charge
  • Correct only for models originally equipped with 5 blade Nippondenso style radiator fan
    • Not correct for models with 4 blade Mitsuba style radiator fan

Now you can buy a high quality cooling fan motor pair that is built to strict quality control standards. It is a great replacement and has substantial cost savings over a dealer set.

Our electrical and electronic parts are subject to strict quality testing.

Parts cannot be returned after they have been installed. Contact us with any questions before installing the parts.

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to

Lifetime Warranty

This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge.

  1. step : Diagnoses (0:50)
    • Turn on the car and the AC and pop the hood.
    • The AC fan should be spinning, if it’s not then check the fuse.
    • If the fuse is fine and the fan doesn’t work or the fuse keeps blowing, then it’s a sign your condenser is bad.
  2. step : Disconnect the battery (2:20)
    • Use an 8 mm wrench to disconnect the negative battery terminal
  3. step : Remove the AC condenser cooling fan (2:30)
    • Remove the plastic skid shield and remove the 10 mm nuts on the radiator mounts.
    • Remove the seven 10 mm bolts and a few pushpins.
    • Disconnect the AC cooling fan
    • Unbolt the four 10 mm bolts anchoring the radiator to allow for some extra room.
    • Remove the two 10 mm bolts mounting the fan to the radiator.
    • Pull the old AC cooling fan up and out.
  4. step : Install the new AC cooling fan (5:15)
    • Put the AC cooling fan down and into place
    • Plug in the AC cooling fan to the wiring harness
    • Bolt the fan to the radiator.
    • Mount the Radiator back into its mounts and bolt in the four 10 mm bolts.
    • Replace the nut down in the radiator mounts underneath the car.
    • Bolt and clip the skid shield back in.
    • Reconnect the battery with your 8 mm wrench

Tools needed for replacement:

    Screwdrivers & Related

  • Flat Blade Screwdriver

  • Wrenches - Metric

  • 8mm Wrench
  • 10mm Wrench

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1997Acura CL Acura CL L4 2.2L 5 Blade Fan Radiator & A/C Condenser Cooling Fan Assembly Pair
1994-1997Honda Accord Honda Accord L4 2.2L with Nippondenso Style A/C Condenser Fan with Nippondenso Style Radiator Fan 5 Blade Fan Radiator & A/C Condenser Cooling Fan Assembly Pair
Part 1ARFK00023
In Stock

Order must be placed by 4pm ET
Delivery options for:

Estimated Arrival Cost

Deliveries made to PO Boxes and FPO may take longer. See our Shipping & Delivery for more information.