Part Details

  • Quantity: Pair
  • Material: Aluminum

This kit includes both heater hose elbows that connect to the intake manifold, tensioner, and water pump on GM 3800 engines. Over time the originals can crack and leak. It is also necessary to remove both when removing the belt tensioner or intake manifold. These rarely come out in one piece, so if you are attempting any one of these jobs this kit is for you!

Specifications:

  • Comes as a PAIR
    • O-rings included
    • Includes both upper & lower connectors
      • (1) - 7/8" x 7/8"
      • (1) - 7/8" x 1"
  • Upgraded Aluminum Construction
  • Direct replacements
  • Built to strict quality control standards
This heater hose kit makes a great replacement and has good cost savings over the parts from the dealer.

Item Condition: New

WARNING:  This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Disconnect the battery (1:45)
    • Disconnect the negative battery cable using your 8mm wrench
  2. step : Move the coolant tank out of the way (1:53)
    • Start out by removing the two 13 mm bolts that hold the strut brace on the passenger's side
    • Remove the two 10 mm bolts using your socket and ratchet.
    • Pull the coolant tank out and set to the side; there’s no need to disconnect it, just take care not to spill any coolant.
  3. step : Loosen the alternator and tensioner (2:25)
    • Remove the 15 mm nut on the top of the alternator.
    • Remove the oil cap.
    • Pull off the cover.
    • Use a 3/8 ratchet to release the tension on the serpentine belt and remove the belt.
    • Remove the three 15 mm bolts securing the belt tensioner.
    • Pull the alternator and tensioner pulleys out of the way a bit and remove the coolant elbow.
    • Remove the old O rings and any debris from the old coolant elbows.
  4. step : Install the new coolant elbows. (5:30)
    • Use some penetrating oil to help seat the O rings and install the new coolant elbows.
    • Bolt the tensioner and alternator in place.
    • Put the serpentine belt back on, using a ratchet handle on the tensioner to get it onto the pulleys.
    • Put the cover and oil cap back on.
    • Use a 10 mm and 13 mm sockets and ratchet to bolt the coolant tank back in place.
    • Reconnect the battery using an 8 mm socket and ratchet or wrench.

Tools needed for replacement:

    General Tools

  • Drain Pan
  • Funnel

  • Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 13mm Socket
  • 10mm Socket
  • 15mm Socket
  • 8mm Socket

  • Specialty Tools

  • Bent Tipped Awl

4.5 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
1
1
0
0
0
Upgrade over OEM
Medal instead plastic won’t break again. I would buy again.
September 17, 2018
Purchased
over 4 years ago
Elbows
I bought these and they broke, but they replaced them. They are working fine. Better then the cheap plastic ones the car came with.
September 13, 2018
Purchased
3 weeks ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

Year Make Model Description
2005-2008Buick Allure Buick Allure Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
2005-2009Buick LaCrosse Buick LaCrosse Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
1996-2005Buick LeSabre Buick LeSabre Upper & Lower Aluminum Heater Hose Elbow Pair Dorman 47065HP
2006-2007Buick Lucerne Buick Lucerne Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
1995-2005Buick Park Avenue Buick Park Avenue Upper & Lower Aluminum Heater Hose Elbow Pair Dorman 47065HP
1996-2004Buick Regal Buick Regal Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
1995-1999Buick Riviera Buick Riviera Upper & Lower Aluminum Heater Hose Elbow Pair Dorman 47065HP
1995-2002Chevy Camaro Chevy Camaro Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
2000-2005Chevy Impala Chevy Impala Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
2004-2005Chevy Impala Chevy Impala Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Supercharged Pair Dorman 47065HP
1998-1999Chevy Lumina Chevy Lumina Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
1998-2005Chevy Monte Carlo Chevy Monte Carlo Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
1995-1998Oldsmobile 88 Olds 88 Upper & Lower Aluminum Heater Hose Elbow Pair Dorman 47065HP
1995-1996Oldsmobile 98-Regency Olds 98-Regency Upper & Lower Aluminum Heater Hose Elbow Pair Dorman 47065HP
1998-1999Oldsmobile Intrigue Olds Intrigue Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
1997-1999Oldsmobile LSS Olds LSS Upper & Lower Aluminum Heater Hose Elbow Pair Dorman 47065HP
1995-2005Pontiac Bonneville Pontiac Bonneville Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
1995-2002Pontiac Firebird Pontiac Firebird Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP
1997-2008Pontiac Grand Prix Pontiac Grand Prix Upper & Lower Aluminum Heater Hose Elbow V6 3.8L Pair Dorman 47065HP

This part replaces:

  • Dorman 47065HP
  • OE # 24503423
  • OE # 12565082
Part #: 1AEMX00178


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

Dorman
Brand #: 47065HP

How-to Video:

(11:40 min)