This Ford Explorer, Explorer Sport Trac, & Mercury Mountaineer FRONT heater blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 8L2Z 19805 A, 8L2Z19805A
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • Fits the FRONT blower motor on vehicles that have a front & rear heater blower motor

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Blower Motor (0:48)
    • Disconnect the wiring harness
    • Remove the two 8mm bolts from the blower motor assembly
    • Remove the blower motor
  2. step : Installing the Blower Motor (2:46)
    • Insert the blower motor into place
    • Tighten the two 8mm bolts to the blower motor
    • Connect the wiring harness

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Fixed my problem....
and was super easy to install. I think from the time I took out the old blower motor to the time I cranked up the engine to see if the new one was working was only about 25 minutes. And a majority of that time was spent resting because of the sweltering heat down here in southern Louisiana!
June 18, 2018
Purchased
1 month ago
Perfect replacement
Perfect fit replacement blower motor for my 2006 Ford Explorer. Although not very technical to install, still a little tricky getting all the screws into place due to location.
January 23, 2018
Purchased
6 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2006-2010 Ford Explorer Front Heater Blower Motor with Fan Cage
  • 2007-2010 Ford Explorer Sport Trac Front Heater Blower Motor with Fan Cage
  • 2006-2010 Mercury Mountaineer Front Heater Blower Motor with Fan Cage

This part replaces:

  • Hollander 615-00104, 615-00142
  • OE # 8L2Z 19805 A
  • Partslink FO3126122
  • TYC 700178
  • DEPO 330-58019-100
Part #: 1AHCX00232

How-to Video:

(04:09 min)