• New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser. Please keep your invoice for proof of this warranty.

  1. step : Accessing the Blower Motor (0:34)
    • Remove the two 5/8 inch nuts from the panel below the glove box
    • Pull down the panel
  2. step : Removing the Blower Motor (1:15)
    • Disconnect the blower motor wiring harness
    • Remove the three 8mm bolts from the blower motor
    • Pull the blower motor down and out
  3. step : Installing the New Blower Motor (2:08)
    • Put the blower motor into place using the locating tab
    • Insert the three 8mm bolts into the blower motor
    • Connect the blower motor wiring harness
  4. step : Reinstalling the Glove Box Panel (3:05)
    • Put the panel into place
    • Fasten the two 5/8 inch nuts onto the panel

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Extensions

  • Sockets - Metric

  • 8mm Socket

  • Sockets - SAE

  • 5/8 Inch Spark Plug Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Stars
Blower motor
Exact replacement. Worked perfectly! Nearly half the cost at my local autoparts store. The online video of how to change it out was a great help!
Thanks 1aauto!
August 16, 2017
9 months ago
Heater blower motor with fan cage
Works as advertised. I picked up a $20 speed control resistor locally and replaced while I was under the dash. The how-to video, while very helpful, really doesn't show the degree of difficulty which should be expected considering the location of the blower motor. Use common sense. For some older folks like me, you might consider removing the passenger seat to give you plenty of room to lie down. It's pretty easy to do. I'm a retired aircraft mechanic and like to dust my tools off occasionally and do my own auto repairs. I've found that 1A Auto is your best bet for price and quick shipping for parts you don't need immediately.
February 6, 2018
3 months ago
Service Saver
Exact replacement and 1a Auto video made easy to learn how to do the installation!
October 25, 2017
7 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 2001-2005 Chrysler Sebring Convertible Heater Blower Motor with Fan Cage
  • 2001-2005 Chrysler Sebring Sedan Heater Blower Motor with Fan Cage
  • 2006 Chrysler Sebring Heater Blower Motor with Fan Cage
  • 2001-2005 Dodge Stratus Sedan Heater Blower Motor with Fan Cage
  • 2006 Dodge Stratus Heater Blower Motor with Fan Cage

This part replaces:

  • Hollander 615-00622
  • OE # 4885612AB
  • TYC 700097
Part #: 1AHCX00192

Ships Same Day for orders placed by 4 P.M. ET

How-to Video:

(04:01 min)