Replaces

Heater Blower Motor with Fan Cage - 1AHCX00126

Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

This blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 52498951, 52498952, 52498855
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • Replaces units with a plastic housing where electrical plug points out the side of housing

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Our electrical and electronic parts are subject to strict quality control testing. Please ensure proper diagnosis of this item before purchasing as the item cannot be returned once installed or plugged in.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Item Condition: New

Attention California Customers:

WARNING:  This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Uninstall the Heater/AC blower motor (0:54)
    • Remove the panel under the glove compartment by unscrewing the three Phillips screws.
    • Unbolt the blower motor by removing the three 6 mm bolts with your socket and ratchet
    • Unplug the wiring harness and pull the blower motor out.
  2. step : Install the new 1A Auto Blower Motor (3:00)
    • Place the blower motor into its mounting and bolt in the three 6mm bolts.
    • Plug in the wiring harness.
    • Replace the panel and screw in the three anchor screws.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver
  • Flat Blade Screwdriver

  • Sockets - Metric

  • 6mm Socket
  • 7mm Socket

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
1995-2002Chevy Cavalier Chevy Cavalier Heater Blower Motor with Fan Cage
2004-2005Chevy Classic Chevy Classic Heater Blower Motor with Fan Cage
2002Chevy Malibu Chevy Malibu Heater Blower Motor with Fan Cage for Models with Plastic Housing
2003Chevy Malibu Chevy Malibu Heater Blower Motor with Fan Cage
2002Oldsmobile Alero Olds Alero Heater Blower Motor with Fan Cage for Models with Plastic Housing
2003-2004Oldsmobile Alero Olds Alero Heater Blower Motor with Fan Cage
1997Oldsmobile Cutlass Olds Cutlass Heater Blower Motor with Fan Cage (excluding Supreme Models)
1998-1999Oldsmobile Cutlass Olds Cutlass Heater Blower Motor with Fan Cage
2002Pontiac Grand Am Pontiac Grand Am Heater Blower Motor with Fan Cage for Models with Plastic Housing
2003-2005Pontiac Grand Am Pontiac Grand Am Heater Blower Motor with Fan Cage
1995-2002Pontiac Sunfire Pontiac Sunfire Heater Blower Motor with Fan Cage
Part #: 1AHCX00126


Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(06:09 min)