This Toyota Camry, Avalon, Lexus ES300 blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following

Specifications:

  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 87103-33021, 8710333021
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

 

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed

 

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Access the blower motor resistor (0:53)
    • Remove the lower vanity panel and set aside.
    • Remove the two Phillips screws to remove the second piece of the vanity panel.
  2. step : Remove the Heater A/C blower motor (1:30)
    • Remove the wiring harness bracket by removing the screws with your screwdriver.
    • Use your 8mm socket and driver to remove the two bolts around the motor.
    • Pull the motor down.
    • Unplug the wiring harness from the motor.
  3. step : Install the new Heater A/C blower motor (3:17)
    • Install the blower motor and plug everything back in.
    • Bolt the motor back in with your 8mm socket and ratchet.
    • Plug everything back in.
    • Install the harness bracket with your screwdriver.
    • Test and replace the vanity cover, screwing in the bolts with the screwdriver and click the second piece back in place.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Screwdrivers & Related

  • Phillips Head Screwdriver

  • Sockets - Metric

  • 8mm Socket

5.0 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
5
0
0
0
0
"The rebirth of my 1994 Toyota Camry".
Car has been in the family over 21 years with three sons haviing driven it during their college years, extended work commutes to save gas money. Returned back to "Pops" with over 241,000 miles on it and needing painting and in the last straw, the A/C and heater motor failed during the hottest months in the eastern part of NC. Your video and explanation was spot on in explaining how to replace the fan motor and the video was on an exact 1994 Camry as mine. I even think the color is the same. I showed the videp to my son and said that we could do this based on the video and explanation. It took us less than 20 minutes to replace the old unit and now I am enjoying A/C and putting miles on my "knock about"car and saving mileage on my 2013 Lexus in the hopes in trading/selling the later part of this year.
July 18, 2018
Purchased
3 weeks ago
It fit and it worked right away
The part arrived on schedule and it was just right for the job. One couldn't ask for more. The video is a bit outdated, mostly with regard to the way one removes the panels to gain access to the fan in newer models you have to remove the glove box and loosen a bolt that holds the panel underneath it) but it helped a lot.
December 21, 2017
Fit Perfect
The fan fit perfect, no alterations needed. A suggestion, if a fan resistor is needed for the 1996 Avalon, it is located above the accelerator ( gas pedal) not on the right side close to the fan. It is up high and hard to get to. I thought that I would pass that along because a lot of times one has to replace that along with the fan. Especially if the fan will only run on one speed.

Thanks for a good product.
October 5, 2017
Purchased
10 months ago
Best replacement part yet
Perfect fit - mechanically and electrically. No splicing wires like with a "universal" motor.
Very pleased.
July 8, 2017
Purchased
1 year ago
Awesome
The part worked great and the 1A Auto is a legitimate company to buy from.
January 21, 2017
Purchased
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Vehicle Fit

  • 1992-1996 Lexus ES300 Heater Blower Motor with Fan Cage
  • 1995-1999 Toyota Avalon Heater Blower Motor with Fan Cage
  • 1992-1996 Toyota Camry Heater Blower Motor with Fan Cage

This part replaces:

  • OE # 8710333021
  • Partslink TO3126112
  • Hollander 615-58277
  • TYC 700051
  • DEPO 312-58011-000
Part #: 1AHCX00096

How-to Video:

(05:25 min)