This Ford & Lincoln full size truck front blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following


  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 2C3Z 19834 AA, 2C3Z19834AA, 2L7H 19805 DA, 2L7H19805DA, 5L34 19805 BA, 5L34 19805 BB, 5L3419805BA, 5L3419805BB, 5L3H 19805 BB, 5L3H19805BB, 6L1Z 19805 B, 6L1Z19805B, MM869, MM930, MM938
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • Replaces the front blower motor on vehicles that have a front and rear unit

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.


Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed


Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Removing the Blower Motor (0:33)
    • Disconnect the blower motor wiring harness
    • Remove the three 8mm bolts from the blower motor
    • Pull the blower motor down and out
  2. step : Installing the Blower Motor (1:36)
    • Lift the blower motor into place
    • Insert the three 8mm bolts into the blower motor
    • Connect the blower motor wiring harness

Tools needed for replacement:

    Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Your video showing the removal and installation of the blower motor was very helpfull, not an easy job but doable.
March 14, 2018
5 months ago
Excellent Service/Parts
This was a painless process. The part was easy to find on your website, there were several options to choose from, and billing and shipping were easy and secure. There was even a video available to demonstrate installation.

When I need parts I know where to go --- 1A Auto.
August 6, 2017
1 year ago
Perfect replacement and good instructional video. The part came in promised time and in good shipping box.
March 25, 2017
1 year ago
2007 F150 A/C Blower replacements
Works as advertised. Would recommend it as a great replacement at a reasonable price.
January 21, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 7 answers
I'm hearing a loud clicking noise from the location of this motor when the air is turned to level 3 or higher, is this motor the problem or could there be another cause?
Mike P on Jul 14, 2016
BEST ANSWER: We are unable to diagnose your problem, because there could be multiple reasons why you���re experiencing this particular difficulty. We suggest you take your vehicle to a reputable shop close to you to identify the problem. Once you know the cause of your problem please feel free to call us toll free at 888-844-3393. We'll be happy to see if we carry the parts needed for the repair.
how do you take out the blower motor on 2003 ford expedition, it wont come down. does it pull up and out from top?
bob g on Jun 4, 2016
BEST ANSWER: I recently replaced the blower motor on a 2006 F150. There are three screws that hold the blower motor in place. One of the screws is hidden towards the back corner and not the easiest screw to find or to get to. I believe your problem in not being able to remove the motor is you might not have removed all three screws. Once those screws are removed the motor will drop right out. By the way, it is just as difficult replacing that screw but don't give up, it can be done.

Vehicle Fit

  • 2003-2006 Ford Expedition Front Heater Blower Motor with Fan Cage
  • 2004 Ford F150 Truck Heater Blower Motor with Fan Cage New Body Style
  • 2005-2008 Ford F150 Truck Heater Blower Motor with Fan Cage
  • 2006-2008 Lincoln Mark LT Heater Blower Motor with Fan Cage
  • 2003-2006 Lincoln Navigator Front Heater Blower Motor with Fan Cage

This part replaces:

  • OE # 6L1Z 19805 B
  • OE # 2C3Z 19834 AA
  • Hollander 615-00642
  • TYC 700139
Part #: 1AHCX00079

How-to Video:

(03:10 min)