This Dodge Chrysler Plymouth Mid Size Car blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following


  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 4885148AB, 4885148AC
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.

Returns Note:

Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed.

Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the AC Heater Fan Blower Motor (1:10)
    • Unclip the push clips securing the duct work in front of the blower motor under the passenger side dash.
    • Disconnect the wiring harness.
    • Unbolt the blower motor and cover with your 8 mm socket and driver.
    • Pull the blower motor down and out.
  2. step : Install the new AC Heater Fan Blower Motor (8:20)
    • Insert the Blower Motor into place
    • Use your 8 mm socket and driver to bolt it into place.
    • Thread the wiring lead through the plastic cover and bolt it in.
    • Plug in the wiring harness.
    • Clip the push clips back in by inserting the body of the clip into place and then pressing the center pin of the push clip down into the body of the clip to secure it.

Tools needed for replacement:

    Ratchets & Related

  • Ratchet
  • Socket Driver
  • Socket Extensions

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 8mm Socket

5.0 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Fast and Easy
I have bought several items and all have been very quick to get here including the heater blower fan. I was very surprised to see that it came with the cage. Made the job much easier, in fact my son put it in himself. I was very happy with everything overall
May 7, 2018
4 months ago
Seems to be OK
Arrived as advertised and installed just like the help video showed. Decent price. Seems to blow a litter harder than the OEM unit.
February 10, 2018
6 months ago
Fits the vehicle it said it would and functions properly. I'm happy with my purchase.
December 25, 2017
8 months ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Who is the manufacturer of this blower motor? I'm comparing with what Rock Auto sells.
James W on Nov 11, 2017
BEST ANSWER: We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.

Vehicle Fit

Year Make Model Description
1999-2004Chrysler 300M Chrysler 300M Heater Blower Motor with Fan Cage
1998-2004Chrysler Concorde Chrysler Concorde Heater Blower Motor with Fan Cage
1999-2001Chrysler LHS Chrysler LHS Heater Blower Motor with Fan Cage
1994-1996Chrysler New Yorker Chrysler New Yorker Heater Blower Motor with Fan Cage
1998-2004Dodge Intrepid Dodge Intrepid Heater Blower Motor with Fan Cage

This part replaces:

  • OE # 4885148AC
  • OE # 4885148AB
  • Partslink CH3126110
  • Hollander 615-00639, 615-00569
  • TYC 700093
  • DEPO 333-58011-000
Part #: 1AHCX00072

Order must be placed by 4pm ET

Get it in: 2 - 4 Business Days

Want it sooner? Choose Next Day Air at Checkout

How-to Video:

(12:42 min)