This Acura & Honda blower motor with fan cage is a new, aftermarket replacement part. It is just what you need to bring your heating and A/C blower system back to good working order! This assembly has the following


  • New, not remanufactured or rebuilt
  • Includes blower motor fan cage impeller already installed
  • Direct replacement
  • Replaces dealer part numbers: 79310-S84-A01, 79310S84A01
  • Built to strict quality control standards
  • 100% tested prior to leaving the factory
  • Replaces the front blower motor on vehicles that have a front and rear unit

If you are experiencing intermittent stopping during use, squealing noise from bearings, or poor air flow from your dash vents this may be your solution.


Our electrical and electronic parts are subject to strict quality control testing.  Once the item has been installed or plugged in, it is no longer eligible for a refund.  The item may be eligible for replacement, only if it is found to have a manufacturing defect. Before purchasing, please ensure proper diagnosis of the failed original part is performed


Left Hand Drive Note:

“All of our auto parts are intended for Left Hand Drive USDM vehicles and might not have been tested on Right Hand Drive platforms. If your vehicle is Right Hand Drive, please do your research prior to making a purchase to ensure the part is correct for your specific vehicle.”

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

  1. step : Remove the AC heater blower motor (0:25)
    • Under the passenger side dash, remove the three T25 screws using your driver.
    • Unplug the wiring harness.
  2. step : Install the new AC heater blower motor (2:30)
    • Plug in the wiring harness
    • Anchor the new AC Heater blower motor by screwing in the three T25 Torx screws.

Tools needed for replacement:

    General Tools

  • Flashlight

  • Ratchets & Related

  • Ratchet

  • Sockets - Metric

  • 8mm Socket

  • Torx Drivers & Sockets

  • T15 Torx Driver

4.7 / 5.0
3 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
Looks slightly different but works fine.
Blower motor works fine for my Honda Odyssey 2001 van. Motor looks slightly different but does fit and does work.
August 10, 2017
12 months ago
Product arrived before it was promised, fit perfectly, and is working properly.
February 1, 2017
1 year ago
Heater blower fan installation.
I would recommend this product, high quality, fair price.
I am a 74 year old woman and had no problem with the installation. 3 screws, how hard can it be?
January 21, 2017
1 year ago
Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
will the heater fan for a 1999 Honda Accord fit the 1992 year model?
Rich B on Jun 26, 2018
BEST ANSWER: Hello, This will not be able to fit for a 1992 model.

Vehicle Fit

  • 2001-2006 Acura MDX Heater Blower Motor with Fan Cage
  • 1998-2002 Honda Accord Heater Blower Motor with Fan Cage
  • 1999-2004 Honda Odyssey Heater Blower Motor with Fan Cage Front
  • 2003-2008 Honda Pilot Heater Blower Motor with Fan Cage Front

This part replaces:

  • OE # 79310S84A01
  • Hollander 615-58456
  • TYC 700002
  • DEPO 317-58002-100
Part #: 1AHCX00020

Out of Stock

How-to Video:

(04:29 min)