Description
Warranty & Shipping
How-To & Tools
Product Reviews
Q&A
Vehicle Fit

Direct Fit Replacement

Direct fit replacement for OEM assembly

Trouble-free Installation

Uses same wiring as original assembly.  No cutting or splicing required.

DOT and SAE Compliant

Meets federal regulations for on-road use

Part Details

  • Quantity: Pair

California Customers:

WARNING:  This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm.  For more information, go to www.P65Warnings.ca.gov.

Lifetime Warranty

This item is backed by a Limited Lifetime Warranty. In the event this item should fail due to manufacturing defects during intended use, we will exchange the part free of charge (excludes shipping charges) for the original purchaser.

Bulb Note:

Unless otherwise noted, our lights do not include bulbs, though occasionally lighting manufacturers do include bulbs in the lights. If you happen to receive a lighting product (Headlight, Tail light, parking light, fog light etc.) that comes with the bulbs, the bulbs are not covered under our warranty. Our warranty applies only to the light assembly..

  1. step : Removing the Headlight (0:24)
    • Open the hood
    • Remove the push pin from the wheel well panel with a trim tool or flat blade screwdriver
    • Pull back the wheel well panel
    • Release the headlight lever behind the wheel well
    • Remove the 10mm bolt from the bottom of the headlight using a long extension
    • Remove the 10mm bolt from the top of the headlight
    • Pull the headlight out starting at the outside
    • Disconnect the headlight electrical connectors
    • Unclip the wiring harnesses from the headlight
  2. step : Installing the Headlight (4:11)
    • Connect the headlight electrical connectors
    • Clip the wiring harnesses to the headlight
    • Slide the grille side of the headlight behind the grille
    • Line up the headlight pins
    • Push in the headlight pins
    • Apply painters tape to the head of one 10mm bolt
    • Install the 10mm bolt at the bottom of the headlight using a long socket extension
    • Install the 10mm bolt at the top of the headlight
    • Clip the white lever onto the back of the headlight
    • Close the wheel well panel
    • Push the clip into the wheel well panel

Tools needed for replacement:

    Materials, Fluids, and Supplies

  • Painter's Tape

  • Ratchets & Related

  • Socket Extensions
  • Ratchet
  • Swivel

  • Screwdrivers & Related

  • Flat Blade Screwdriver

  • Sockets - Metric

  • 10mm Socket

  • Specialty Tools

  • Trim Tool Set

There are no reviews for this item.
Will this fit my car? Add a vehicle to make sure
Customer Q&A
Ask a question to 1A Auto customers who purchased the product
No questions have been asked about this item.
Year Make Model Description
2009-2010Dodge Ram 1500 Truck Dodge Ram 1500 Truck Headlight Pair for Models with Quad Headlights
2010Dodge Ram 2500 Truck Dodge Ram 2500 Truck Headlight Pair for Models with Quad Headlights
2010Dodge Ram 3500 Truck Dodge Ram 3500 Truck Headlight Pair for Models with Quad Headlights
2011-2017Ram 1500 Truck Ram 1500 Truck Headlight Pair for Models with Quad Headlights
2011-2017Ram 2500 Truck Ram 2500 Truck Headlight Pair for Models with Quad Headlights
2011-2017Ram 3500 Truck Ram 3500 Truck Headlight Pair for Models with Quad Headlights
Part #: 1ALHP01264

Out of Stock

How-to Video:

(06:45 min)