Replaces
Part Details
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Features and Benefits
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
This video is brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, my name is Mike Green. I want to help you save time and money repairing your vehicle. I have 20+ years experience restoring and repairing cars and trucks. My company, 1A Auto, sells high quality replacement parts over the internet. In this video I will be showing you how to install these parts. By the end of this video, you will know how to install them and where to get them, and that is going to save you time and money. Thank you and enjoy the video.
In this video, we are going to replace the parking light on a 2004 Sierra 2500, which is basically the same as any 1999-'06 GMC Sierra. This is a pretty easy process, it doesn't require any tools. There is two pins that hold the headlight in, right there and there, and you'll twist those out and pull them up. Then the headlight basically comes right out and then once it is out, you can reach in behind and unplug the lights. They're basically just little teeth that you can pull with your thumb and they unplug. Then the parking light is actually snapped in. There is a little bracket that goes into the side there, and then a little piece that you squeeze and snap out there, and you can see it, switch hands here and I'll push on that tooth and the light will pop out.
Then you just pull it forward and twist out the bulbs, and you can now service either those bulbs or if you need to replace the whole parking light because it got damaged or broken, you can do that. Then to install is the reverse of the procedure, insert the harnesses and twist to lock in. Side marker light and you want to get the inside tooth in there first. Then you can see that at a little better angel here. That just presses right into that slot and locks in. Then you re-install your headlight. At this time, just to show you, you can service the headlight bulbs if you want to, just twist and pull them right out. That's the high beam, same thing with the low beam. They just twist and pull right out. If you were replacing that headlight, you can see that black bracket, you might be able to bolt that on to the new headlight or if you headlight assembly comes with that whole thing, then it just goes in that easily.
Just place the light back into place and use your pins, twist them into place and lock them and there you are. You've just replaced the parking light and we will do a quick test. The running lights, the low beams, high beams, and signals just to make sure and you see actually our side marker light is not working, so we will actually go back in and replace that small bulb and fix that side marker light.
We hope this helped you out and thank you very much. This video was brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Feel free to call us toll free, 888-844-3393, we are the company for you on the internet and there for you in person too. Thank you very much.
Tools used
Tools used
Take these two pins out, twist this forward, and then slide them out. Just grab the light assembly and disconnect the connectors right here and right here. Now we can access this retainer right here. Just take a screwdriver, push down on this clip, and you can slide the light out this way. Disconnect the connector right here. Just twist it to the side and the whole socket will come out. Push down on this pin, twist it, same with this one, and pull it right out. All right. Take the socket and just line it up. It's always a good idea to replace the bulbs at this time. Lock them in place. Do the same on this one. Lock it in place. And the same for this one. And lock that in place. Now you want to slide these tabs over here just like that. Once that's lined up, can get this lined up into here. Just use a little bit of pressure. There we go, and just push back, lock it in. And connect these connectors. And line this up, make sure you push the wires back. That's lined up. Take the pins. Before I lock that down, make sure this pin goes in. I'm gonna have to adjust it a little bit. Might have to loosen them up to get them to line up. And there you go, lock them in place.
Tools used
Tools used
This video is brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, my name's Mike Green. I want to help you save time and money repairing your vehicle. I have 20-plus years experience restoring and repairing cars and trucks. My company, 1A Auto, sells high quality replacement parts over the Internet. In this video, I'll be showing you how to install these parts. By the end of this video, you'll know how to install them and where to get them. That's going to save you time and money. Thank you and enjoy the video.
This video, we'll be replacing the headlight on a 2004 GMC Sierra, basically the same as a '99 to '06 Sierra. It is a pretty easy process. It requires no tools. So, with that, we'll get you to it.
There are two pins that hold the headlight in right there and there, and you'll twist those out and pull them up. Then, the headlight basically comes right out. Then, once it's out, you can reach in behind and unplug the lights. They're basically just little teeth that you can kind of pull with your thumb, and they unplug.
Okay, now we're going to replace the headlight. At this time, you can obviously service the bulbs if that's all you're looking to do. So, they just twist in ... or twist out and twist back in. Then, our headlights come with that whole bracket and everything, so if you're replacing your headlights at this point, you're plugging them in and then everything should install just the same way. Plug them in, put the headlight back in there. Take your pins, put them down through. Obviously you have to make sure that the headlight is all the way back in and lock them into place, and your head light's all set.
Now, we'll do a quick test. Just make sure everything's working. The headlight, the high beam, and the signal are not working. Actually that side marker's not working, so we'll really quickly replace that, and then, you're all set. Hope this helps you out. Headlights are pretty easy to service on these GMC trucks.
This video was brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Feel free to call us toll free 888-844-3393. We're the company for you on the Internet, and there for you in person too. Thank you very much.
